NEC Elite Set/Cansel Relocation Mode

If You have questions please call (866)206-2316 or email
MasterTelephone@gmail.com http://www.telephonesetup.com/


Se t R e l o c a t i o n M o d e
SET/CANCEL USING ACCESS CODE
Press Feature.
Dial Set Relocation Mode code 84.

NEC Elite Au t o m a t i c Tr u n k t o Trunk Tr a n s f e r

If You have questions please call (866)206-2316 or email
MasterTelephone@gmail.com http://www.telephonesetup.com/


Au t o m a t i c Tr u n k t o Trunk Tr a n s f e r
PROGRAM/MODIFY/ERASE
FORWARD ASSIGNMENT
Press Feature.
Dial Automatic Trunk Transfer code 63.
Dial incoming trunk number to be
forwarded:
Individual trunks 01~64 or
All trunks 00
Dial #.
Dial outgoing telephone number where
calls are to be directed.
Press Feature.
NOTE: Once set, incoming calls to the selected CO/PBX line(s) will automatically be routed to the
programmed telephone number.


SET/CANCEL
Press Feature.
Dial Automatic Trunk
Transfer code:
Set 61
Cancel 62
Dial incoming trunk number
to be set/cancelled:
Individual trunks 01~64
All trunks 00
Press Feature.

NEC ELITE TRUNK TO TRUNK TRANSFER

NEC Elite Tr u n k t o Trunk Tr a n s f e r

With an outside call in progress:
Press Transfer.
Dial trunk access code i.e. 9.
Dial telephone number, wait for answer.
Press Feature.
Press Transfer.
Replace handset.
NOTE: Once established, a trunk to trunk connection cannot be re-entered.

Samsung DCS/iDCS name change


If You have questions please call (866)206-2316 or email
MasterTelephone@gmail.com www.TelephoneSetUp.com

Press TRSF 104

Dial station namber(eg. 205)

Enter station name using dialpad and press right soft key to return.

Press TRSF to store and exit.

Norstar MICS/CICS Changing the name of a telephone

<-show button (top right lit button)
<-next

*

*

Begin the programming session
Press Feature
Press **266344
Press 23646
Change the name of a telephone
Terminals & Sets Press Show
Show set: Enter the internal number of the telephone
Press Show then Next
Press CHANGE
Press the numeric dialpad button that has the first
Letter of the name until the display shows the letter
You want

Press Next
The name can be up to seven characters longPress RLS to end your session

Norstar MICS/CICS voicemail reset password

Norstar MICS/CICS voicemail reset password


Resetting the password using a telephone
Follow this procedure to reset a mailbox password using a telephone.
1. Press FEATURE 983.
2. Enter the system administration mailbox number and password (1020000 or 120000 or 10020000).
3. Press MBOX.
4. Press CHNG.
5. Enter the number of the mailbox you wish to change.
6. Press Next until Password appears on the display.
7. Press RESET.
8. Press Rel. or hang up

NORSTAR voicemail To initialize a mailbox
1 Press FEATURE 981
2 Log on by following the voice prompts.
3 Enter the default password ØØØØ.
4 Mast change pswd This display appears briefly to indicate that you must change your
password.
5 Enter a new password from four to eight digits long that does not
start with zero.
Press OK or #.
6 Reenter the new mailbox password and press OK or #’
7 At the tone, record the name in the Company Directory.
Include the mailbox number in the recording, For example, “Pat
Smith, mailbox 5813.”
Press OK or # to end the recording.
8 Press OK or # to accept the recording
or
press PLAY or 1 to listen to the recording
or
press RETRY or 2 to re-record your name.
9 Press ® to end the session.

Master Communications, Inc Services

Whether you're a small business with several phone lines or a large corporation with several hundred phone extensions, Master Communications can design, build, and install a customized telephone system to meet your specific needs.

Key and PBX
Telephone Systems
Voice mail
Computer Telephony
Voice over IP
Video and Audio
Conferencing
Call Accounting
Security and
Surveillance
Controlled Access,
T1, Telephone lines
High Speed Internet

NORSTAR, AVAYA, NEC, MITEL, TOSHIBA, SAMSUNG, PANASONIC, COMDIAL, SRX, IWATSU and more

AVAYA Partner overview

Reliability, simplicity, a large selection of advanced telephony features, and converged communications through fractional T1 make the PARTNER® Advanced Communications System ideal for small growing businesses. This system is designed to help meet the complex business needs facing small enterprises today-with room for growth to meet future needs.Available for more than 16 years, over one million PARTNER systems have been sold worldwide.
What's New With This ReleaseThe totally redesigned PARTNER ACS Release 7 processor delivers enhanced system functionality, growth and system processing speed that will set the stage for future enhancements and additional applications. All existing expansion modules and sets from older PARTNER ACS system can be used or reused in conjunction with the new 509 processor. This exciting change means cost savings for customers who require more than 3 CO lines and even more flexibility in growth.
Business Benefits
• Many included applications to simplify call answering including built-in Caller ID support and standard connections for answering machines, cordless sets, credit card readers and fax machines.
• Improved Customer Service: through enabling businesses to respond quickly and with quality to customers 24 x 7 x 365.
• Mobile employees can stay connected to the business with 3910 Wireless Telephones for employees who are away from their desks and Cell Phone Connect for employees who need to be reached while off premises.
• Standard Fax Management notifies users when the fax machine is busy, in use or in trouble so that it can be immediately repaired.

AVAYA overview

IP Office is a highly modular IP telephone system designed to meet the needs of home offices, standalone businesses, and networked branch and head offices for small and medium enterprises. The award-winning IP Office gives growing companies a complete solution for telephony, messaging, networking, conferencing, customer management, and unified communications.

IP Office is a versatile communications solution that combines the reliability and ease of a traditional telephony system with the applications and advantages of an IP telephony solution. This converged communications solution can help businesses reduce costs, increase productivity, and improve customer service.

Business Communications Manager (BCM)
Overview


Business Communications Manager (BCM) portfolio delivers small to medium-sized businesses and branch offices an award winning converged voice and data solution, providing a choice of IP-enabled or pure-IP strategy. Leveraging existing Meridian, Norstar, and Communication Server 1000 investments, Business Communications Manager offers the features businesses of all sizes require like telephony, unified messaging, multimedia call center, interactive voice response, IP routing and data services such as firewall, wireless, and more

Norstar: Systems - Modular ICS
Overview


The Norstar Modular Integrated Communications System (ICS) is a key system designed for growing small-to-medium businesses and is expandable up to 248 ports. Advanced integrated applications include voice messaging, unified messaging, digital networking, enhanced call centers and speech recognition. The Modular ICS can grow with your business through the addition of trunk and station modules as you need them.

Norstar: Systems - Compact ICS
Overview


Designed for growing businesses, the Norstar Compact Integrated Communications System (CICS) offers from 4 to 8 lines and 8 to 24 telephone extensions. It supports all Norstar and Business Series telephones, including fully-featured digital functions with LCD and soft keys. Easily add Norstar applications, such as voice mail, automated attendant, computer telephony integration (CTI), and automatic call distribution (ACD).

NEC Key systems info

SMB Communication Platforms

NEC SMB Communication Platforms help employees of small- to medium-sized companies respond to their business challenges more effectively. SMB Communication Platforms are an ideal investment for small and growing organizations that require an advanced communication solution designed specifically with them in mind.
Built-in management functions bring value and control to growing businesses. Systems are easy to use, install and maintain resulting in a very low Total Cost of Ownership. All SMB Communication Platforms are built for the future and are designed for easy system software upgrades. This design keeps your investment current for many years to come.
UNIVERGE SV8100
Whether your business is small or medium-sized, NEC’s UNIVERGE SV8100 Communications Server provides the flexibility to meet all of your communication needs. This powerful, feature-rich solution is completely scalable and can be expanded for future growth.
UNIVERGE SV8300
The UNIVERGE SV8300 Communications Server is a robust, feature-rich solution that can be expanded to meet a medium-sized business’s communications needs for both today and tomorrow.
UX5000
The UX5000 Communications Server is a comprehensive integrated solution designed to meet the unique challenges of both business telephony applications and VoIP. This top performance system supports pure peer-to-peer IP telephony connectivity and advanced networking, - all from one system!
Elite IPK II
A single processor TDM and IP key/hybrid system that expands to 456 ports. The system supports NEC’s full suite of business features, as well as the hotel/motel feature set.

NEC PBX Systems info

NEC's UNIVERGE™ NEAX® family of voice systems has been designed for a lifeline rather than a lifecycle.
For nearly two decades, each successive model has migrated to the next, allowing new technology to be adopted when it is practical for the end user.
Relatively simple upgrades have kept the UNIVERGE NEAX voice systems current in technology and functionality, all while preserving up to 80% or more of the customer's existing investment.
NEAX 2000 IPS
Internet Protocol Server The UNIVERGE NEAX 2000 Internet Protocol Server (IPS) is a full-featured PBX that supports advanced networking, pure peer-to-peer IP telephony connectivity and traditional TDM switching capabilities.

TIME CHANGE INSTRUCTIONS
NEAX 1000 / 1400 / 2000 IVS / 2000 IVS-2 / 2000 IPS
With Dterm Series III, Series E and Series i Phones
CAT Mode Procedure: This is to be done while the phone is in an idle state.
1. Press
2. Press
3. Press *
4. Press
5. Press
6. Press #
7. “CAT MODE” displayed on LCD
8. Press
9. “COMMAND” displayed on LCD
10. Press 02
11. Press
12. Press 2
13. Press
14. “02>2>Current Time” displayed on LCD
15. Input correct time using military time (HH MM SS)
16. Press
******************************************************************************************
NEAX 1000 / 1400 / 2000 IVS / 2000 IVS-2 / 2000 IPS
With Dterm Series II Phones
CAT Mode Procedure: This is to be done while the phone is in an idle state.
1. Press
2. Press
3. Press *
4. Press
5. Press
6. Press #
7. “CAT MODE” displayed on LCD
8. Press
9. “COMMAND” displayed on LCD
10. Press 02
11. Press
12. Press 2
13. Press
14. “02>2>Current Time” displayed on LCD
15. Input correct time using military time (HH MM SS)
16. Press

Toshiba Strata DK Telephone System

Changing the time on a Strata DK system must be done from the "main" or primary phone. It is usually extension # 10, or # 200.
1.-
With the phone on-hook, dial intercom, #, 652 (depending on the system type, the # may or may not apply)
2.-
Enter the correct time using HH/MM/SS, like 07:24:00
3.-
Press redial




TOSHIBA 16 Leave the handset on hook, press intercom 6 5 2, then enter the time of a 24 hour clock, entering 2 digits for the hour, 2 digits for the minutes, and 2 digits for the seconds ? enter a leading 0 for any single digit entered, press Redial, press Speaker. This must be done at extension 10 ? usually the receptionist phone. For example, if the time is 2:15 P.M., press intercom 6 5 2, 1 4 1 5 0 0, Redial Speaker. . TOSHIBA 16E / 40 Leave the handset on hook, press intercom # 6 5 2, then enter the time of a 24 hour clock, entering 2 digits for the hour, 2 digits for the minutes, and 2 digits for the seconds ? enter a leading 0 for any single digit entered, press Redial, press Speaker. This must be done at extension 10 ? usually the receptionist phone. For example, if the time is 2:15 P.M., press intercom # 6 5 2, 1 4 1 5 0 0, Redial Speaker. TOSHIBA 280 / 424 Leave the handset on hook, press intercom # 6 5 2, then enter the time of a 24 hour clock, entering 2 digits for the hour, 2 digits for the minutes, and 2 digits for the seconds ? enter a leading 0 for any single digit entered, press Redial, press Speaker.This must be done at extension 200 ? usually the receptionist phone. For example, if the time is 2:15 P.M., press intercom # 6 5 2, 1 4 1 5 0 0, Redial Speaker. TOSHIBA CTX 100Do Not Pick Up Handset (Must be done at display phone)- Press Hold Button * # * # 1 * 2 * 3 *- Display says Password =- Enter 0 0 0 0 - Press HOLD Button - Display says Prog =- Enter 9 0 2- Press HOLD- Display says Select Param
To change Date:- Press Intercom Button- Enter Date: YY MM DD (YY=02, MM=10, DD=28) - Press HOLD Button- Press HOLD- Lift Handset and return to cradleTo change Time:- Press Line 1 button (button directly above intercom button)- Enter Time: HH MM SS (HH=22 MM=03 SS=00) - military time must be used- Press HOLD- Press HOLD- Lift handset and return to cradle
Toshiba DK280
Date


From receptionist station, without lifting the handset, press "Intercom"
Dial "#651"
Dial the time in YY:MM:DD format.
Press "Redial" or "#".
Press speaker.
Time


From receptionist station, without lifting the handset, press "Intercom"
Dial "#652"
Dial the time in military format HH:MM:SS.
Press "Redial" or "#".
Press speaker.
Day of the Week

From receptionist station, without lifting the handset, press "Intercom"
Dial "#653"
Dial the day of the week (1-7).
Press "Redial" or "#".
Press speaker.
Toshiba Perception System - from attendant station
Follow all steps even if you wish to change only the time on your system.
Display Date:

Press the "DIS TOD" key.
The date is now displayed as follows:SRC cos DESTMonth Day Year
Set Date:
Enter the date on the dial pad in MMDDYY format. The new date is displayed.
Display Time:

Press the "DIS TOD" key again.
The time is now displayed as follows:SRC cos DESTHours Minutes Seconds
Set Time:
Enter the time in military time HHMMSS format (for example, 090105 for 9:01 am and 5 seconds and 210105 for 9:01pm and 5 seconds). The new time is displayed.
To Start the Clock and Clear Display:
Press the "DIS TOD" key a third time.

PANASONIC
Panasonic KX-TA624 / 824 Telephone System

Changing the time on a Panasonic KX-TA624 system must be done from extension # 101 using a display phone.
1.-
Press the "PROGRAM" button on the face of the phone
2.-
Enter programming mode by pressing "STAR" - "POUND" - "1234" (default password = 1234)
3.-
Enter program # 000
4.-
Press "SPEAKER" button
5.-
Press "FORWARD/DND" button to change to the hour selection
6.-
Press "TRANSFER" button and enter the hour
7.-
Press "FORWARD/DND" button to change to the minutes parameter
8.-
Press "TRANSFER" button and enter the minutes
9.-
Press "FORWARD/DND" button to change to the AM/PM parameter
10
Press "MUTE" button to select AM or PM
11.-
Press "STORE" button (listen for 1 tone if procedure was executed correctly / 3 tones if procedure failed)
12.-
Press "HOLD" button
13.-
Press the "PROGRAM" button on the face of the phone


Panasonic KX-TVS Voice Mail System

Changing the time on a Panasonic KX-TVS voice mail system can be done from any phone.
1.-
Dial the TVS pilot number (extension 107 or 115)
2.-
When the voice mail system answers press "#" + "6" + "STAR"
3.-
Log into the message manager's mailbox (999)
4.-
Press "6" for other features
5.-
Press "3" to set the time & date
6.-
Press "1" to change the current time (press "0" for help)
7.-
Enter the hour then press "#" or enter the hour and minutes then press "#"
8.-
Press "1" for AM or "2" for PM
9.-
Press "2" to accept the new time


Panasonic Digital Telephone System

Changing the time on a Panasonic digital system can be done from any display phone.
1.-
Enter programming mode by pressing "PAUSE" then "STAR" button twice, followed by 1, 2, 3, 4
2.-
Enter program # "000"
3.-
Press "SPEAKER" button
4.-
Press "FORWARD/DND" button to change to the hour selection
5.-
Press "TRANSFER" button and enter the hour
6.-
Press "FORWARD/DND" button to change to the minutes parameter
7.-
Press "TRANSFER" button and enter the minutes
8.-
Press "FORWARD/DND" button to change to the AM/PM parameter
9.-
Press "MUTE" button to select AM or PM
10.-
Press "STORE" button
11.-
Press "HOLD" button
12.-
Lift and replace handset

Panasonic DBS System

From the designated attendant console (usually x100, but not always), enter the following code sequence:To set the date and time:
1.-
Press the ON/OFF key
The phone issues intercom dial tone.
The current date and time are displayed on your LCD.
2.-
Press the PROG key."F" appears on the display
3.-
Dial "##.""Program Mode:" appears on the first line of the display; "MAIN MODE" appears on the second line.
4.-
Press the FF1 key."SELECT SUB MODE" appears on the second line of the display.
5.-
Dial "1#.""1:DATE 2:TIME" appears.
6.-
Dial "1#.""MONTH/DAY/YEAR" appears.
7.-
Enter six digits for the month, day, and year.For example, to set the date to March 3, 1993, enter "030393."
8.-
Press #."TIME SET MODE appears on the display.
9.-
Enter four digits for hours and minutes (24-hr. time).For example, for 11:00 a.m., enter "1100."
10.-
Press #.
11.-
Press the ON/OFF key.
The new date and time appear on the display

Panasonic Digital Telephone System

Changing the time on a Panasonic KX-TD, KX-TDA or KX-TDE digital system can be done from any display phone.
1.-
Enter programming mode by pressing "PROGRAM" button then "STAR" button twice, followed by 1, 2, 3, 4
2.-
Enter program "000" and press Enter
3.-
Press "SPEAKER" button two times, you will see the time.
4.-
Enter the correct hour.
5.-
Press "FORWARD/DND" button to advance to the minute selection
6.-
Enter the correct minutes (if necessary to update).
7.-
Press "FORWARD/DND" button to advance to the AM/PM selection.
8.-
Press "MUTE" button to select AM or PM (if necessary to change).
9.-
Press "STORE" button
10.-
Lift and replace handset to exit the programming mode.
11.-
This will change the time for all of the phones on your phone



How to set the time on your Panasonic Voice Mail
Press the intercom button on your phone.
Dial 165 and then raise the handset.
When the Voice Mail answers you, dial # 6 (POUND SIX)
Dial *999 (STAR NINE NINE NINE)
Enter your password. (usually your zip code) followed by the # (POUND)
Wait for the system to say, ?To receive the message?
Then dial 6 (for other features)
Then dial 3 (to set the clock)
Then dial 1 (to change the time)
Enter the time followed by a # (POUND) Example for 9:37 is---Enter 937#
The system will ask for 1 for AM or 2 for PM
Enter the correct digit
The system will ask for 1 to change or 2 to accept
Enter 2 (to accept)
Hang up


624 Most Often Changed System Programs

Program #
Program Function

000
Time & Date

001
Systems Speed Dial Numbers, include the line access codes, up 32 digits max

006
Day / Night / Lunch Change Mode, It is best set this for automatic mode

007
Day / Night / Lunch Start/Stop Times, Lunch does not need to be set, nor night

105
Conference Tone, some users desire this alerting tone be eliminated

309
Emergency Numbers, (911 is default) bypasses Toll Restriction if programmed

400
Outside Line Connection, disables a CO port not in use and removes the line from Automatic CO Line Hunt process (i.e. Dial 9)

401
Dial Mode, on outside lines, DTMF (Touch Tone is default), Dial Pulse is optional

405,406, 407
Flexible Outward CO Line Access, Day/Night/Lunch

408, 409, 410
Flexible Incoming CO Line Ringing Assignment, Day/Night/Lunc

411, 412, 413
Delay Ringing Assignment, Day/Night/Lunch

414, 415, 416
Co Line Mode Incoming, All ? DIL - DISA, Day/Night/Lunch

604
Extension Name Assigment

608
Executive Override, eliminates CO line privacy

610
Parallel Connect, needs to set to simultaneously connect SLT with a Systems Phone (7020,7030,7130??)

700, 701, 702
Door Intercom Box Extension Ringing Assignment, Day/Night/Lunch

703, 704, 705
Door Opener (Dry Contact) Control Extension Assignment, Day/Night/ Lunch

706
Door Intercom Box Ring Tone, change for distinctive ringing

707
Door Intercom Box Access Tone, disable if using just for monitoring purposes

900
Caller ID, enable by line, when sevice is provided by Telephone Company

901
Caller ID Local Area Code, needed for digit modification

902
Caller ID Digit Modification for Local Calls, for automatic call back

903
Caller ID Digit Modification for Long Distance Calls, for automatic call back


Night Mode/Day ModeHow do I change ringing mode?
KX-TDA 50/100/200/600
Press Time Service Button to change. If Time Service light is off, you are in DAY MODE, Red = NIGHT MODE, Green = LUNCH MODE, Flashing Green = BREAK MODE, Flashing red = HOLIDAY MODE
KX-TD 308
Press DAY key or NIGHT Key to change ringing mode. If no key available press INTERCOM 780 for DAY or INTERCOM 781 for NIGHT.
KX-TD 308/186/1232
Press DAY key or NIGHT Key to change ringing mode. If no key available press INTERCOM 780 for DAY or INTERCOM 781 for NIGHT.
KX-TA1232
Press DAY key or NIGHT Key to change ringing mode. If no key available press INTERCOM 780 for DAY or INTERCOM 781 for NIGHT.
KX-TA 624 KX-TA 824
Press DAY key, LUNCH key or NIGHT Key to change ringing mode. If no key available press INTERCOM 781# for DAY or INTERCOM 782# for NIGHT or INTERCOM 783# for LUNCH.
KX-TD 500
Press DAY/NIGHT Key at main phone. No code available for the TD 500. Program a DAY/NIGHT Key by pressing PROGRAM 99, Press the key you desire to use, Press 73, press STORE, Lift Handset and hang up.
KX-T 308/616/1232
Press DAY key or NIGHT Key to change ringing mode. If no key available press INTERCOM 781# for DAY or INTERCOM 782# for NIGHT.
How can I determine if the system is in Day or Night Mode?
From any display phone, with the handset down and the speakerphone off, press the # key. The display will say Day or Night Mode or Lunch Mode.
On the KX-TDA systems, press TRANSFER

Adjusting the Mitel SX-200 EL/ML For Daylight Savings Time

To program the system to automatically make Daylight Savings Time Adjustments:

From the Console
1.-
Press FUNCTION
2.-
Press [ATT FUNCTION]
3.-
Press [SET TIME]
4.-
Press [PM] if you wish to register the time as after 12:00 PM, in 12 hour format.
5.-
Press [SET] to enter the time.
6.-
Press [EXIT] when done.


Adjusting the Mitel SX-2000 LIGHT For Daylight Savings Time
To program the system to automatically make Daylight Savings Time Adjustments:

From the Console
1.-
Press FUNCTION
2.-
Press [FUNCTION]
3.-
Press [DATE/TIME]
4.-
Press [SET TIME]
5.-
Press [PM] if you wish to register the time as after 12:00 PM, in 12 hour format.
6.-
Press [SET] to enter the time.
7.-
Press [EXIT] when done.
SX-2000 and SX-2000 MicroLight

Setting the System Time:To set the time from the main Console...
1.-
Press FUNCTION
2.-
Press [ATT FUNCTION]
3.-
Press [SET TIME
The display will ask you to enter the time. The time (which can be in either the 12 or 24 hour format, depending on system programming), is entered as HH:MM, where HH is hours and MM is minutes.When two digits have been entered for the hours, the ':' will automatically be displayed.After you enter four valid digits, the display will give you the option to SET or choose for the hour you entered to be PM.You may:
1.-
Press [PM] if you wish to register the time as after 12:00 PM, in 12 hour format.
2.-
OR Press [SET] to enter the time as shown.
3.-
Press [EXIT]
Note: [PM] will appear only is the 12 hour clock is programmed in the system, and the hour entered is 01-12. [SET] will appear only if the same time has been entered correctly. The < Key can be used to back up and correct an incorrect digit.
SX-200 DIGITAL, SX-200 ML & EL, 200ICP

To change the TIME on the System:
1.-
Press FUNCTION
2.-
Press [ATT FUNCTION]
3.-
Press [SET TIME
4.-
Enter HOUR and MINUTE, TWO Digits each (i.e. 12:01)
5.-
IF 12 Hour Format, enter PM
6.-
Press SET
7.-
Press [EXIT]
To Change the DATE on the System:
1.-
Press FUNCTION
2.-
Press ATT FUNCTION
3.-
Press SET DATE
4.-
Enter DATE, DAY, MONTH, YEAR
5.-
Press SET
6.-
Press EXIT
SX-50 (Analog)


1.-
Dial ATTENDANT FUNCTION ACCESS CODE (71 OR *) OR PRESS FUNCTION KEY
2.-
Dial ATTENDANT FUNCTION ACCESS CODE (14) PLUS TWO DIGIT HOUR AND MINUTE
3.-
EXAMPLE FOR 11:00AM: ENTER 14 PLUS 1100.
SX-200 (Analog)

To set the TIME:
1.-
Dial *5
2.-
The ANSWER lamp lights... the DESTINATION lamp lights
3.-
Dial Hours
3.-
Dial Minutes
3.-
Dial * if time is PM (not required if 24 hour clock is used)
3.-
DESTINATION Display shows: Hours, minutes (and P if PM and 12-hour clock)
3.-
ATT lamp is lit
3.-
Press RELEASE Key
3.-
ANSWER and DESTINATION lamps go out
3.-
Time is now displayed

Adjusting All the Samsung DCS & iDCS Systems For Daylight Savings Time

Changing date & time on the Samsung DCS & iDCS systems

With Handset Down
Action
Display Will Show
1. Press TRSF Button
Programming Mode
Enter PGM ID:
2. Enter 200
Enable Cus. Prog.
Passcode:
3. Enter 1234 (Or Your Passcode If Different)
Enable Cus. Prog.
Disable
4. Press VOL UP Button
Enable Cus. Prog.
Enable
5. Press TRSF Button
Normal Idle Display
6. Press TRSF Button
Programming Mode
Enter PGM ID:
7. Enter 505
Old: 2 1 0 2 8 9 7: 1 2 0 2
New:WMMDDYY:HHMM
8. Enter Day, Date, & Time (See Below)
Old: 2 1 0 2 8 9 7: 1 1 0 2New:WMMDDYY:HHMM
W= Day Of Week (1= Monday, 2= Tuesday, etc.)
MM= Month DD= Day YY= YearHH= Hour MM= Minute (Enter in military format)
9. Press TRSF Button
Normal Idle Display

Adjusting the Samsung 12/24 and 56/120 For Daylight Savings Time
Changing date & time on the Samsung 12/24 and 56/120

Action
Display Will Show
With Handset Down
1. Press #20
OPEN SYSTEM PMGENTER CODE
2. Enter 1234 (Or Your Passcode If Different)
OPEN SYSTEM PMGCLOSED:
3. Press MUTE Button
OPEN SYTEM PMGOPENED:
4. Press #
NORMAL IDLE DISPLAY
5. Enter #70
YY
MM
DD
W
HH
MM
98
10
26
1
10
33
6. Enter Date, Day, & Time (See Below)
YY
MM
DD
W
HH
MM
98
10
26
1
10
33
YY= Year MM= Month DD= DayW= Day Of Week (1= Monday, 2= Tuesday, etc.)HH= Hour MM= Minute (Enter in military format)
7. Press #
NORMAL IDLE DISPLAY


Adjusting the Samsung StarMail For Daylight Savings Time
Changing date & time on the Samsung StarMail

Action
System Will Respond
1. Press the voice mail button (on any telephone) or Dial 510.
Enter password
2. Enter **456# or **(Your password)#.
Enter Function.
3. Enter 320#
The current time is (current time)Enter the time in 12 hour format or press # to confirm.
4. Enter the time in 12 hour (AM / PM) format and press #.
For AM press 1. For PM press 2.
5. Enter 1 or 2 and press #.
Current Time. Confirm.
6. Enter #.
Enter Function.
7. Enter 110#
The system will return to the main greeting.


Adjusting the Samsung 816 For Daylight Savings Time
Changing date & time on the Samsung 816

With Handset Down
Action
Display Will Show
1. Press #
"Programming"
2. Enter 04
"Disabled"
3. Enter 43211
"Disabled 1"
4. Press #
"Normal Date & Time"
5. Press #
"Programming"
6. Enter 55
"YYMMDDWHHMM"
7. Enter Date, Day & Time (See Below)
"98010111157"
YY= Year MM= Month DD= DayW= Day Of Week (1= Monday, 2= Tuesday, etc.)HH= Hour MM= Minute (Enter in military format)
8. Press #
"Normal Date & Time"


Adjusting the Samsung 816 Plus For Daylight Savings Time
Changing date & time on the Samsung 816 Plus

With Handset Down
Action
Display Will Show
1. Press #
"Programming"
2. Enter 06
"Disabled"
3. Enter 43211
"Disabled 1"
4. Press #
"Normal Date & Time"
5. Press #
"Programming"
6. Enter 55
"YYMMDDWHHMM"
7. Enter Date, Day & Time (See Below)
"98010111157"
YY= Year MM= Month DD= DayW= Day Of Week (1= Monday, 2= Tuesday, etc.)HH= Hour MM= Minute (Enter in military format)
8. Press #
"Normal Date & Time"