SIP EXTENSION

SIP EXTENSION REGISTRATION
Description
iPECS-LIK supports standard protocol equiped SIP Phone including series of LG-Ericsson SIP Phone Extension.
Operation
SIP Phone Self Programming Network Configuration
1. IP mode : Static(Fixed) / DHCP
2. Subnet Mask
3. Default gateway IP address
4. IP address
5. DNS IP address
6. Prifiling (for Wireless)
SIP Server Configuration
1. Proxy IP address : MFIM IP address
2. Proxy IP port : 5060
3. Domain : MFIM IP address
4. Registration : ON
5. Registration Timer : 30 ~ 3600 second (more than 10 minute recommended)
6. Local UDP/TCP/TLS port : 5060 or other value
7. Signaling/Transport Mode : UDP (or TCP or TLS)
Line(User) Configuration
1. SIP Account :
- Display Name (Optional) : Station Name (this will be applied to MFIM – Station Name).
- User Name (Mandatory) : Station Number (this should be same as MFIM – Device Login / Station User Login (443) / ‘Desired Number’)
- Authorization Name (Mandatory) : Login ID (this should be same as MFIM – Device Login / Station User Login (443) / ‘ID’)
- Authorization Password (Optional) : Login Password Login ID (this should be same as MFIM – Device Login / Station User Login (443) / ‘Password’)
Call Preferences
1. Call Wait : ON / OFF (When on BUSY, accept other call setup or not)
2. Call Forward
3. DTMF Type (Mandatory) : one of INFO type (After registration to system, SIP Data / SIP Phone Attributes(211) / ‘DTMF Type’ – set the same type as SIP Phone) c.f) only support INFO type
8-1
4. CODEC
5. Call Blocking … and so o

Voicemail

Code Control See Security Code. Voice Mail
Alternate Next Call
Routing Mailbox See Next Call Routing Mailbox. Voice Mail
Announcement Mailbox Mailbox that allows a recorded greeting to play to callers. Automated Attendant
Announcement Message The message that the System Administrator records for a specific Announce-
ment Mailbox. Automated
Attendant
Answer Table Determines how the Automated Attendant answers outside calls on each trunk, according to the time of the day and day of the week that the call is ringing.
Automated Attendant
Answering Schedule
Override Enables an alternate greeting and alternate dialing options for callers. Automated
Attendant
Auto Attendant Direct to Voice Mail
Auto Attendant Direct to Voice Mail sends Automated Attendant calls directly to Automated an extension user's mailbox. Their phone does not ring for calls from the Auto- mated Attendant.
See Greeting in this glossary.
Attendant
Auto Erase or Save When a mailbox user completely listens to a new message and then exits their
mailbox, InMail either automatically archives or deletes the message. Voice Mail
Auto Time Stamp After a user listens to a message, InMail can optionally announce the time and
date the message was left. Voice Mail
Automated Attendant The Automated Attendant can automatically answer the telephone system incoming calls, play an Instruction Menu message, and provide dialing options to callers.
Automated Attendant
Automated Attendant Transfer
While on a trunk call, an extension user can transfer the trunk call to the Auto- mated Attendant so the caller can use the Automated Attendant dialing
options. Voice Mail
Automatic Access to VM by Caller ID
InMail mailbox can be associated with a specific caller ID (CID) number. When the CID number is presented to the InMail it will automatically log the user into
their mailbox. Voice Mail
Automatic Call Routing
to a Mailbox See Go to a Mailbox in this glossary. Automated
Attendant
Automatic Message
Erase/Save See Auto Erase or Save in this glossary. Voice Mail
Automatic Routing for
Rotary Dial Callers If an Automated Attendant caller does not dial any digits, InMail automatically
routes them to a specified option (such as the operator or a mailbox). Automated

Call Forward to a Mailbox An extension user can forward calls to their mailbox. Voice Mail
Call Routing Mailbox The mailbox associated with an AnswerTable that specifies which dialing options (Dial ActionTable) and announcements are available to Automated Attendant callers.
Automated Attendant
Caller ID A telephone company service that provides a caller's number and optional name. The telephone system can pass this information to InMail to enable
Caller ID with Return Call. System
Caller ID with Return Call See Make Call and Time and Date Stamp. Voice Mail
Calling (Logging On to) a
Mailbox See Log On to Voice Mail. Voice Mail
Calling the Automated
Attendant Automated Attendant callers can use various InMail features and then return to Attendant
the Automated Attendant for additional dialing options. Automated
Cascade Message Notification
If an extension user receives a new message in their mailbox, Cascading Message Notification calls them, at up to five preset destinations, to let them
know a new voice mail message has arrived. Voice Mail
Day, Night, and Holiday
Greetings See Flexible Answering Schedules. Automated
Attendant Deleting a Message See Message Delete. Voice Mail
Deleting Mailbox Security
Code See Mailbox Security Code Delete. Maintenance
Dial Action Table Defines the dialing options for a Call Routing Mailbox chosen by the active AnswerTable, which in turn provides those dialing options to Automated Atten- dant callers.
Automated Attendant
Directory Dialing Directory Dialing allows an Automated Attendant caller to reach an extension
by dialing the first few letters in the extension user's name. Automated
Attendant
Distribution List A Distribution List shows extensions that receive a message you record and send to a single Distribution Mailbox. Any message left in the Distribution
Mailbox is automatically sent to all the mailboxes in the list. Voice Mail
Email Notification
Email Notification automatically sends an email notification when a Subscriber Mailbox receives a new message. The email can optionally include the recorded message as a .wav file attachment.To hear the message, the email recipient double-clicks the .wav attachment to have the message play in their .wav player (such as Windows Media Player).
Voice Mail
Erasing All Messages Lets the System Administrator delete mailbox messages system-wide. Maintenance Exiting a Mailbox An extension user can exit their mailbox by dialing a code or by hanging up. Voice Mail
Fax Detection The Automated Attendant can detect incoming fax calls and transfer them to a
fax machine. System
Find-Me Follow-Me Find-Me Follow-Me helps an Automated Attendant caller locate an extension
user who is not at their desk. Automated
Attendant ments and dialing options, depending on the time of day and day of week. Automated
Flexible Answering
Schedules The Automated Attendant can answer outside calls with different announce-
Attendant
Flexible Call Routing
The Automated Attendant can provide outside callers with a wide variety of dialing (routing) options. There are 3 components to Flexible Call Routing. See AnswerTable.
See Call Routing Mailbox. See Dial ActionTable.
Automated Attendant
Flexible Mailbox
Numbering Plan If the telephone system extension numbers are customized, the InMail mailbox
Forced Unscreened
numbers can be customized to match. System Transfer A Subscriber Mailbox can optionally convert Automated Attendant Screened
Transfers to Unscreened Transfers. Automated
Attendant
Forwarding Calls to a
Mailbox See Call Forward to a Mailbox. Voice Mail
Getting RecordedHelp If an extension user dials an incorrect code or forgets what to dial while in their
mailbox, they can request help from the InMail voice prompts. Voice Mail
Go to a Mailbox An Automated Attendant caller can dial a digit and route directly to a mailbox.
Greeting
A Subscriber Mailbox user can record a personalized greeting for their mailbox. With Multiple Greetings, the mailbox subscriber can record up to three separate greetings and make one of the three active. Callers to the user's mailbox hear the active greeting.
With Remote Greeting, an extension user can call into the Automated Atten- dant, access their mailbox, and remotely record their mailbox greeting. See Auto Attendant Direct to Voice Mail.
Voice Mail
Group (Shared) Mailbox An extension user can share a Group Mailbox with co-workers for receiving
and sending messages. Voice Mail
Guest Mailbox An outside party can have their own mailbox for receiving and sending
messages. Voice Mail
Hang Up An Automated Attendant option that immediately hangs up the outside call. Automated Attendant
Help See Getting Recorded Help. Voice Mail
Individual Trunk
Greetings See Multiple Company Greetings. Automated
Attendant
InMail Upload Download
Audio Allows the user to upload/download audio messages for greetings, etc. Voice Mail
Instruction Menu The Instruction Menu is the announcement that plays to Automated Attendant callers. Normally, the Instruction Menu provides callers with the Automated Attendant dialing options.
Automated Attendant
Language Setting This feature allows the telephone display language and the InMail mailbox
language to be changed from the telephone. Voice Mail
Leaving a Message An extension user can leave a voice message in a co-worker's mailbox if that
extension is busy, unanswered, or in Do Not Disturb. Voice Mail
Leaving a Message at a
Busy/DND Extension See Leaving a Message. Voice Mail
Leave a Quick Message See Quick Message. Automated Attendant
Listening Options See Listening to Messages. Voice Mail
Listening to Messages While or after listening to a message, an extension user has many message
handling options from which to choose. Voice Mail
Live Monitor
Live Monitor lets Voice Mail screen calls, just like an answering machine at home. When activated, the extension's incoming calls route to the user's subscriber mailbox. The Live Monitor feature is supported for External and Internal calls. Once the mailbox answers, the user hears the caller's incoming message.
Voice Mail
Live Record Allows an extension user to record an active call as a message in their mailbox. InMail broadcasts a beep and a voice prompt to the caller as Live
Record begins. Voice Mail
Local Notification See Message Notification. Voice Mail
Log On to Voice Mail
An extension user can press a key to log on to access their InMail mailbox. With Remote Logon, an employee calling through the Automated Attendant can dial a single digit followed by their own mailbox number to remotely log on to their mailbox.
Voice Mail
Mailbox Announcement Message
The Mailbox Announcement Message is recorded by the System Adminis- trator, and plays to each subscriber when they log on to their mailbox. The message plays at each log on until it expires, is deleted, or made inactive by the System Administrator.
Administration
Mailbox Greeting See Greeting. Voice Mail Mailbox Logon See Log On to Voice Mail. Voice Mail
Mailbox Name A mailbox caller can hear the extension user's recorded name instead of their
mailbox number. Voice Mail
Mailbox Options Menu Sub-menu of a subscriber's Main Menu that provides access to the Auto Time
Stamp, Mailbox Security Code Delete, and Message Notification features. Voice Mail

Specifications NEC SL1100

Station Port 2W Key Set 24 48 72 Max. 24/KSU 084M+080Ex2
SLT (–28V) 20 40 60 1KSU: 084M+008Ex2 2KSU: 084Mx2+008Ex6 3KSU: 084Mx3+008Ex9
ISSUE 1.0
BRI (S-Point) 12 24 36 1KSU: BRIx3 on 084M/080E/008E 2KSU: BRIx6 3KSU: BRIx9
2W DSS Console 12 Connect to digital extension Port at 084M/080E
Doorphone 2 4 6 2DPH I/F on 084M (analog extension port 3,
4)Alternative use with SLT
SIP-MLT/ SIP Std.
terminal 16 When MEMDB is Installed
VRS Channels 4 CFVRS-C1
VM/VRS
CFVMS-C1
Max. 16 When MEMDB is installed Channels 2 VM ports/ 4 VRS ports (default)
(Total Max.8 w/o MEMDB or 16 w/MEMDB)
Port increased by license.
4 VM ports/ 4 VRS ports (default) (Total Max.8 w/o MEMDB or 16 w/MEMDB)
CFVML-C1
Port increased by license.
Virtual Extension 50
Relay 2 4 6 2 circuits on 084M
Power Failure Transfer 3 6 9 1 PFT circuit on 4COIDB (COI port 1 and PF port)
External Paging (Audio Out) 1 2 3 1 audio-In/Out and 2 audio-In circuits on 084M.
Select one of 084M for MOH/BGM.
External MOH (Audio In) 1 External BGM (Audio In) 1 Ethernet Port 1 1 circuit on CPU Built-In Answering Machine
Channel 1 1 circuit on CPU
VoIP Channels 16 When MEMDB is Installed V.34 Modem 1 1 circuit on PZ-VM21 Conference Circuits 32 (Max. 16 parties per Conference)
DSP Resource *1 16 For 1228M KSU (DSP on CPU) 16 When PZ-VM21 is installed
- 32 64 For 1228ME EXP 32ch DSP on each EXIFE-C1
DSP Sender*2

Chime Bell

Chime Bell
Description
A station can be configured to activate a Chime at another station. When activated, the assigned station will receive the Chime Bell tone for the Chime Bell timer. In addition, a Chime Bell can be configured to activate the External Loud Bell contact.
Operation
To program a Chime Bell Flexible button at a DKT,
1. Press the [TRANS/PGM] button.
2. Press the desired Flexible button.
3. Press the [TRANS/PGM] button
4. Dial ‘*’ 9.
5. Press the [HOLD/SAVE] button.
To activate the Chime Bell,
1. Press Chime Bell button at a station as to activate a Chime Bell.
Consideration
 The ring stops when Chime Bell Timer expires.
 A muted Chime Bell is used if the receiving station is busy.  Chime Bell is available only to DKTs.
Reference
A. Station User Programming
B. Flexible Buttons
C. External Loud Bell

CLI Message Wait

CLI Message Wait
Description
When a call is received with Caller or Calling Line ID, the Id is displayed in the DKT LCD as well as the LCD of compatible SLTs. If the call is an ISDN line DID call and disconnects before the called station can answer, the system can activate a CLI Message Wait for the called station. The DKT LCD shows the CLI Message and the [Call Back] button LED flashes. The user may view the CLI Messages, return the call, save the CLI number as a Speed Dial or simply delete the CLI Message.
Operation
To view CLI Messages,
1. Press the [Call Back] button to display the first message. 0314504626
DATE TIME CNT:xx
2. Use the Volume Up/Down buttons to scroll through messages.
To manage CLI Messages,
1. Press the Select softkey to select a CLI Message.
2. To call the number, press the Hold/Save button.
To delete the current CLI Message, press Del Cur softkey.
To store the number as a Speed Dial, press the Save softkey or. To delete all CLI messages press the DND/FOR button.
To delete all CLI Message Waits from the Attendant,
202
1. Press the TRANS/PGM button.
2. Dial ‘0 5 5’.
3. Dial the station range.
4. Press the Hold/Save button.

SIP Phone

Operation
SIP Phone Self Programming Network Configuration
1. IP mode : Static(Fixed) / DHCP
2. Subnet Mask
3. Default gateway IP address
4. IP address
5. DNS IP address
6. Prifiling (for Wireless)
SIP Server Configuration
1. Proxy IP address : MFIM IP address
2. Proxy IP port : 5060
3. Domain : MFIM IP address
4. Registration : ON
5. Registration Timer : 30 ~ 3600 second (more than 10 minute recommended)
6. Local UDP/TCP/TLS port : 5060 or other value
7. Signaling/Transport Mode : UDP (or TCP or TLS)
Line(User) Configuration
1. SIP Account :
- Display Name (Optional) : Station Name (this will be applied to MFIM – Station Name).
- User Name (Mandatory) : Station Number (this should be same as MFIM – Device Login / Station User Login (443) / ‘Desired Number’)
- Authorization Name (Mandatory) : Login ID (this should be same as MFIM – Device Login / Station User Login (443) / ‘ID’)
- Authorization Password (Optional) : Login Password Login ID (this should be same as MFIM – Device Login / Station User Login (443) / ‘Password’)
Call Preferences
1. Call Wait : ON / OFF (When on BUSY, accept other call setup or not)
2. Call Forward
3. DTMF Type (Mandatory) : one of INFO type (After registration to system, SIP Data / SIP Phone Attributes(211) / ‘DTMF Type’ – set the same type as SIP Phone) c.f) only support INFO type
8-1
4. CODEC
5. Call Blocking …

Incoming Virtual Extension Ring

Incoming Virtual Extension Ring Tone Order Setup to set the priority (1-4) for the Virtual Extension Ring Tones set in Program 15-08. When Virtual Extension calls ring an extension simultaneously, the tone with the highest order number (e.g., 1) rings. The other keys just flash.
Input Data
Extension NumberUp to 8 digits
Item No. Order Data Description Related Program
011-40 = Tone pattern 1 1 = Tone pattern 2 2 = Tone pattern 3 3 = Tone pattern 4 4 = Incoming extension ring tone
Default
In the case of that two or more virtual exten- sions are set on a function key on the keyset, and the tone pattern by which the sound of each extension differs, the priority of ring sound is set.

Off-premise Message Notification

Off-premise Message Notification parameters
You can set up the parameters for Off-premise Message Notification from any tone dial phone. The parameters are:
• destination type (phone, extension or pager)
• destination number (phone, extension or pager)
•time range for receiving calls at phone numbers or extensions. Pagers are notified any time there is a qualifying message.
•types of message you want to receive (all new messages or just urgent messages)
Note: The restrictions that apply to your phone line also apply to Off-premise Message Notification numbers. For example, if you cannot dial long distance phone numbers from your phone, you cannot have a long distance Off-premise Message Notification destination numb

T1 Trunking (with ANI/DNIS Compatibility)

T1 Trunking (with ANI/DNIS Compatibility)
Description
The T1/PRI Interface gives the system T1 trunking ability. This unit provides up to 24 trunk circuits. In additional to providing digital-quality trunking, the T1/PRI Interface allows you to have maximum trunking ability with fewer unit. This in turn makes more universal slots available for other functions.
You can program each T1/PRI for any combination of the following trunks:
•CO loop start
•CO ground start
•Direct Inward Dialing
T T1/PRI uses the first block of 24 consecutive trunks. For example, if you have a COIU installed for
trunks 1~8, the T1/PRI Interface automatically uses trunks 9~32. If you have COIU installed for trunks 1~8 and 17~24, the T1/PRI uses trunks 25~48. The T1/PRI Interface cannot use trunks 9~16 (even if available) since they are not part of a consecutive block of 24 trunks. Each T1/PRI requires that 24 consecutive ports be available in the system even if not all the ports are used otherwise the unit does not function.
The T1/PRI can be programmed as a 4/8/12/16/20/24 port Fractional T1/PRI. ANI/DNIS Compatibility
The system is compatible with Telco T1 Automatic Number Identification (ANI) and Dialed Number Information Service (DNIS) services. A compliment to Caller ID service, ANI/DNIS Compatibility provides:
•Receive Format
The Receive Format must be set as *ANI*DNIS* in PRG 34-09-01 option 4, which is treated as a Feature Group D format. (Example of ANI Information KP009727517645STKP7100ST.)
•Flexible Routing
Based on the data received, the system can route the incoming ANI/DNIS call to:
-An extension
-An ACD or Voice Mail master extension number (V1.5 or higher)
-A VRS and play a VRS message to the caller
-A Department Group pilot number
-A trunk Ring Group
•Route According to DID Translation Table or Speed Dial Bins
Calls can be routed based on either the number of digits defined in PRG 22-09-01 (digits 1~8) or by digits entered in Speed Dial bins in PRG 13-04-01.
ANI/DNIS Data Displayed as Caller ID Data
•Data Error and Unanswered Call Handling
If a call cannot be completed, send it to a predetermined Ring Group or play supervisory tones to the caller.
Conditions
•At Release 1 Receive Format for ANI/DNIS is Feature Group D (PRG 24-09-01, option 4) only. Other Formats are future enhancement.
•T1 Trunking requires a T1/PRI Interface and a customer-provided CSU/DSU to interface with the Telco. Consult your sales representative and the System Hardware Manual for additional details.
•ANI/DNIS Compatibility requires using system DTMF receivers. When all receivers are busy, the incoming ANI/DNIS call waits for a receiver to become available

Add-On Conference

Add-On Conference
___________________________________________________________________________________
FEATURE DESCRIPTION
Add-On Conference allows a conference call with a total of four parties with various combinations of outside lines and stations. This increases efficiency by allowing multiple parties to enter a conversation.
System Software supports up to 16, 4-party conferences with no more than two outside lines per conference.
ENHANCEMENT(S)
With Release R2000 or higher, a Single Line Telephone or PSII can perform a 1 terminal - 2 outside party conference call.
SYSTEM AVAILABILITY
Terminal Type: All stations
Required Components: None
OPERATING PROCEDURES
To initiate an Add-On Conference using a Multiline Terminal with a call in progress:
1.Press D .
2.Dial a station number or outside party, and inform the answering party of the conference. 3.Press D again. The D LED is on continuously. Talk with both parties.
4.Repeat steps 1~3 to add an additional party to the conference.

IP phone Support

IP phone Support
Description
The ipLDK-60 can support up to 16 IP Phones. Each IP Phone registers with the ipLDK employing the MAC address of the IP Phone. The IP Phone sends a registration request to the IP address of the ipLDK assigned in the IP Phone. The ipLDK will compare the MAC address in the registration and, if a match is found in the IP Phone Table, registration is allowed. Once registered, the IP Phone will function as any other phone in the system, with the exception that an IP channel must be available for the IP Phone to place or receive a call.
Operation
Operation of an IP Phone is the same as the DKT.
Consideration
 An IP channel must be available for an IP Phone to place or receive a call including CO line, station to station, transfer, and conference calls. If no channel is available, the system returns error tone for internal calls and re-routes external calls to the Attendant.  An IP Phone cannot initiate a conference call to stations in a networked system.
 IP Phones employ the MAC address for registration. Phontage IP Softphone employs a
User name and Password for registration to the system.
 If the IP Phone or Phontage is not available to the system (network outage), the system can reroute the call to the user’s Voice Mailbox or the registered mobile phone. The station must be assigned VMIB access and Auto Forward to VMIB or the mobile extension must be registered.
 To transfer a call to a station in a networked system, the IP Phone user must await
ringback tone before disconnecting from the transfer.
 The VOIB must be Appended to the Stations as a Virtual VOIB code 99, see PGM 103, Logical Slot Assignment.
Reference
A. Private Networking
B. Call Transfer
C. Multi-party Conference
D. VMIB Mailbox

SL1100 InMail Quick Reference Sheet

SL1100 InMail Quick Reference Sheet for Multiline Display Telephone
Using Dial Pad

TO SET UP YOUR INMAIL VOICE MAILBOX ❏ Dial the voice mail pilot number ________________ ❏ Enter your mailbox number ___________________ Once You Are In Your Mail Box Perform the Following Steps:
TO RECORD PERSONAL GREETING ❏ Press 4 . . . . . . . . to access the greeting menu ❏ Press 1 . . . . . . . . to select your main greeting ❏ Press 2 or 3. . . . . to select an alternate greeting ❏ Press 7 . . . . . . . . to record a new greeting
Sample Greeting: You have reached the voice mail of __________. Please leave your name and call back number (s) and I will return your call as soon as possible. For immediate assistance press zero. Thank you.
TO RECORD YOUR NAME ❏ Press 76 . . . . . . . to access recording menu ❏ Press 7 . . . . . . . . to record name ❏ Press # . . . . . . . . to exit
TO SET SECURITY

Queue Status Display

Queue Status Display
Description
When all agents in an ACD Group are unavailable, an incoming call will queue and cause the Queue Status Display to occur on the ACD agent’s display. The display helps the agents keep track of the traffic load within their group. In addition, any display Multiline Terminal can have a Queue Status Display Check programmable function key. The Multiline Terminal user can press this key any time while idle, and using the volume  or , scroll through the Queue Status Displays of all the ACD Groups. The Queue Status Displays shows (see the Queue Status Display illustration below):
 The number of calls queued for an available agent in the group.
 The trunk that has been waiting the longest, and how long it has been waiting.

Code

* + Enter Account Code + * Enter an Account Code.Account Codes- ** Pick up a call ringing or waiting at another extension. Directed Call Pickup Voice Re- sponse System (VRS) - *#Pick up a call ringing an exten- sion in your pickup group (ex- cept Ring Group calls). Group Call Pickup24 *0Answer a Message Waiting re- quest. Message Waiting38 733Set the Automatic Transfer for each trunk line. Transfer- 734Cancel the Automatic Transfer for each trunk line. Transfer- 735Set the Destination for Automat- ic Trunk Transfer. Transfer- *1 + Paging Group Number Make a Combined Page.Paging- + 0Cancel Call Forwarding.Call Forwarding- No setting (After + 001~084 + busy) Disconnect a call in progress on a trunk. Forced Trunk Disconnect- *5Log out of or in to an ACD group. Automatic Call Distribution (ACD) *10(V1.5 Added) *6 + Orbit (01~64)Pick up a call parked in a system Park orbit (01 ~ 64). Park *04 + orbit *8Call your mailbox.Voice Mail- #* #* Enter system programming mode. System Programming Pass- word Protection - Hookflash + ## + En- ter Account Code + Hookflash Enter an Account Code at a Sin- gle Line Terminal. Account Codes- #0Use Universal Answer Code to pick up a call ringing over the paging system. Central Office Calls, Answering- Hookflash + #1 + ex- tension + hookflash twice Activate Conference from a Sin- gle Line Terminal. Conference- #2 + binDial a Common Speed Dialing number. Speed Dialing2

NEC SL1100

System
Analog Caller ID Detector (de-
tected by DSP) 96 channels
Classes of Service 15 20–06 Day/Night Mode Numbers 8 12–07 Day/Night Service Patterns 4 12–07
DialTone Detector
DTMF Receiver 96
Toll Restriction Classes 15
Verifiable Account CodeTable 800 35–06 Trunk
Trunk Port Number 84 Trunk Ports (Total) : 76
• Analog Trunks 36
• T1/PRI Trunk Ports 48
• VoIPDB Trunk Ports (VoIPDB & MEMDB is re- quired. Need license to be Max.)
16
DID TranslationTables 20 22–10 DID TranslationTable Entries 800 22–10 DISA :
• Classes of Service
15 20–14
• Users 15
25–09 Ring Groups 25 22–04 Trunk Access Maps 84 14–07 Trunk Group Numbers 25 14–05 Trunk Routes 25 14–06 Extension
Telephone Extension Ports 84
• MultilineTerminals 72
• Single Line Phones/Analog
Devices 60
• VoIPDB Extensions (SIP- MLT/Std)
(VoIPDB & MEMDB is re- quired. Need license to be Max. (SIP-Std))
32
Digital Extension Ports
• Physical Ports 01 ~ 08
Range 1 ~ 89999999* Telephone Extension Number
(*Extension cannot start with 0 or 9)
Virtual Extension Ports 50 11–04
Virtual Extension Number Range 1 ~ 89999999*
(*Extension cannot start with 0 or 9) 11–04
Door Boxes 6 32–02 Door Box Numbers 1 ~ 6 32–02
DSS Consoles Numbers :
• 60 Button DSS Console 12 30–01
Operator Access Number 0 (Default) Operator Extension 15 Speed Dialing
Speed Dialing Groups 32 13–02 Speed Dialing Bins 0 ~ 999 13–02 Speed DialingTable-Common 900 13–01–03 Automated Attendant
VRS Message Numbers 1 ~ 100 25–06 Conference
Conference Circuits 32 : maximum
(16 Parties Per Conference)
Department and Pickup Groups
Department (Extension) Group
Numbers 1 ~ 32 16–01
Call Pickup Group Numbers 1 ~ 32 23–02 Hotline
Internal Hotline 84 External Hotline 84 Paging and Park
Internal Page Group Numbers 0, 01 ~ 32 31–02 External Page Group Numbers 1 ~ 3 31–04 External Speakers 1 ~ 3 31–04 Park Group Numbers 1 ~ 64 24–03 Park Orbits 1 ~ 64 24–03 SMDR
SMDR Ports 1 ~ 2 35–03 VRS/VM InMail
VRS/VM InMail 1
VRS/VM Ports
(Need license and MEMDB) 16
VRS Port
(Need MEMDB) 16
VRS Attendant Messages 3
VRS Recordable Messages 100 40–10–02 VRS Ports 16
RTP Ports 0 ~ 65534 RTCP Ports 0 ~ 65535 DSP Resources 16 Passwords Programming Passwords :
PCPro/WebPro User Name : ***** Level 1 (MF)
Level 2 (IN)
necam PCPro/WebPro User Name : 12345678
Level 3 (SA)
sltech PCPro/WebPro User Name : 0000
Level 4 (SB)
ADMIN1 PCPro/WebPro User Name : 9999
ADMIN2 Programming Password Users 8
Extension numbers can be one to eight digits long. Refer to the Flexible Sys

Email Notification

Email Notification
SL1100
Description
Email Notification automatically sends an email notification when a Subscriber Mailbox receives a new message. The email can optionally include the recorded message as a wav file attachment.To hear the message, the email recipient double-clicks the wav attachment to have the message play in their wav player (such as Windows Media Player).
Email Notification uses SMTP (Simple Mail Transfer Protocol) to deliver messages to the recipient's email account. If the message recipient has a mobile telephone service provider with an SMS (Short Message Service) portal, they can optionally choose to have text messages delivered right to their cell phone. In either case, Email Notification does not provide synchronization - the email account and the voice mailbox operate independently. For example, deleting the voice mail message does not auto- matically delete the email and vice-versa.
If Email Notification tries to deliver an email and it doesn't go through because of a connection problem (i.e., no connection or a dropped connection), it will retry every 15 minutes for 24 hours. If the email still can't go through, Email Notification cancels the delivery. Email deliveries that fail because authenti- cation fails or the encryption mode is incorrect are immediately cancelled.
Collecting the Email Notification Data
In order for the installation site's SL1100 to send email notifications, it must have a valid SMTP email account assigned. To save time during programming, use the following table to help collect the system's email account information. The email account provider can supply this information. See Programming in this feature