Expension Card
This card is used to add 4 additional expansion ports to the IP500 and IP500v2 control unit. This card is only supported in slot 4.
· Supports
Provides 4 additional expansion ports for connection of external expansion 379
modules.
· Supported Expansion Modules: The following external expansion modules are supported:
· IP500 Analogue Trunk Module · IP500 BRI So Module
· IP500 Digital Station Modules · IP500 Digital Station Modules A · IP500 Control Unit:
· IP500 Phone Module
· IP400 Digital Station V2 Modules · IP400 Phone V2 Modules
· IP500v2 Control Unit:
· Maximum per Control Unit: 1 - Right hand slot 4 only. · IP500 Trunk Card Support: .
· Each external expansion module is supplied with a blue 1 meter (3'3'') expansion interconnect cable. This cable must be used when connecting to expansion ports on the rear of a control unit.
· When connecting to expansion ports on an IP500 4-Port Expansion card, a yellow 2 meter (6'6") expansion interconnect cable can be used in place of the standard blue cable. 4 Yellow cables are supplied with the IP500 4-Port Expansion card.
For AVAYA, NORSTAR, NEC, SAMSUNG, MITEL, PANASONIC, TOSHIBA telephone systems and voicemail call (866)206-2316 or email MasterTelephone@gmail.com
................................................ .. .. . .. . .. .. .2-51 Table 2-16 RJ-45
Memory Capacity of MEMDB-C1 .............................................................. 1-6 Table 1-2 System Capacity ................................................................................. 1-9 Table 2-1 KSU Packing List ................................................................................. 2-2 Table 2-2 Items on the CPU card .......................................................................... 2-2 Table 2-3 EXIFB-C1 Packing List .......................................................................... 2-7 Table 2-4 Connectors of EXIFB-C1 ........................................................................ 2-8 Table 2-5 Power Requirement ................................................... . .. .. . .. . .. . .. .. . .. . .. .. . . 2-12 Table 2-6 RJ61 Cable Connector Pin-Outs (J101-J103) ..............................................2-16 Table 2-7 IP4WW-Battery Box Packing List ................................................... . . .. . .. .. .2-17 Table 2-8 Battery Specifications ................................................... . .. .. . .. . .. .. . .. . .. .. . . 2-18 Table 2-9 Expansion Cards ................................................... . .. . .. .. . .. . .. .. . .. . .. .. . .. . . 2-38 Table 2-10 Expansion Card Packing List ................................................... .. .. . .. . .. .. .2-38 Table 2-11 RJ-61 Digital Connector Pin-Outs (J101, J102) ...........................................2-48 Table 2-12 RJ-61 Analog Pin-Outs (J101, J102) ................................................... . .. ..2-49 Table 2-13 RJ-61 CO/PF Pin-Outs (J2, J3) ................................................... . .. .. . .. . ..2-50 Table 2-14 RJ-61 BRI Pin-Outs (S-Bus, T-Bus) ................................................... . . .. ..2-51 Table 2-15 Switch Setting of 2BRIDB-C1 ................................................... .. .. . .. . .. .. .2-51 Table 2-16 RJ-45 PRI Pin-Outs (S-Bus, T-Bus) ................................................... . . .. ..2-53 Table 2-17 Switch Setting of 1PRIU-C1 ................................................... . .. . .. . .. . .. .. .2-53 Table 2-18 LED Indication ................................................... . . .. . .. .. . .. . .. .. . .. . .. .. . .. . . 2-54 Table 2-19 T1 LED Indications ................................................... .. . .. .. . .. . .. .. . .. . .. . .. . 2-55 Table 2-20 E1 LED Indications ................................................... .. . .. .. . .. . .. . .. .. . .. . .. . 2-56 Table 2-21 MEMDB-C1 Packing List ................................................... . .. . .. . .. .. . .. . .. . 2-58 Table 2-22 VOIPDB-C1 Packing List ................................................... . .. . .. . .. .. . .. . .. . 2-61 Table 2-23 VOIPDB LED Indications ................................................... . .. . .. . .. .. . .. . .. . 2-65 Table 2-24 Operation of VOIPDB LED Indic
PRI Pin-Outs (S-Bus, T-Bus) ................................................... . . .. ..2-53 Table 2-17 Switch Setting of 1PRIU-C1 ................................................... . .. . .. . .. . .. .. .2-53 Table 2-18 LED Indication ................................................... . . .. . .. .. . .. . .. .. . .. . .. .. . .. . . 2-54 Table 2-19 T1 LED Indications ................................................... .. . .. .. . .. . .. .. . .. . .. . .. . 2-55 Table 2-20 E1 LED Indications ................................................... .. . .. .. . .. . .. . .. .. . .. . .. . 2-56 Table 2-21 MEMDB-C1 Packing List ................................................... . .. . .. . .. .. . .. . .. . 2-58 Table 2-22 VOIPDB-C1 Packing List ................................................... . .. . .. . .. .. . .. . .. . 2-61 Table 2-23 VOIPDB LED Indications ................................................... . .. . .. . .. .. . .. . .. . 2-65 Table 2-24 Operation of VOIPDB LED Indications .....................................................2-66 Table 2-25 PZ-VM21 Packing List ................................................... . .. . .. . .. .. . .. . .. . .. . 2-66 Table 2-26 MultilineTelephone Functions (12TXH/24TXH/24TIXH (IP)) ............................2-71 Table 2-27 Doorphone Interface Specifications ................................................... .. . .. . 2-82 Table 2-28 RJ-61 General Purpose/Door Unlock Relay Control Connector (J7) ...................2-83 Table 2-29 General Purpose/Door Unlock Relay Specifications .....................................2-83 Table 2-30 External Paging Output Specifications .....................................................2-84 Table 2-31 BGM/External MOH Source Input Specifications .........................................2-85 Table 3-1 Start Up Method .................................................................................. 3-1 Table 4-1 Status LEDs ................................................... . .. . .. . .. .. . .. . .. .. . .. . .. .. . .. . .. . . 4-10 Table 4-2 CPU LED Indications ................................................... . . .. .. . .. . .. .. . .. . .. .. . . 4-12 Table 5-1 System Capacity ................................................................................. 5-1 Table 5-2 Operating Conditions ............................................................................ 5-3 Table 5-3 Power Requirement .............................................................................. 5-3 Table 5-4 Electrical Specifications of KSU ................................................................ 5-4 Table 5-5 IPTerminal Power Chart ........................................................................ 5-4 Table 5-6 IEEE802.af Class Specification ................................................................ 5-4 Table 5-7 Mechanical Specifications ...................................................................... 5-5 Table 5-8 Optional Unit Mechanical Specifications ...................................................... 5-5 Table 5-9 Doorphone Interface Specifications ........................................................... 5-5 Table 5-10 General Purpose/Door Unlock Relay Specifications ...................................... 5-6 Table 5-11 External Paging Output Specifications ....................................................... 5-6 Table 5-12 BGM/External MOH Source Input Specification
For AVAYA, NORSTAR, NEC, SAMSUNG, MITEL, PANASONIC, TOSHIBA telephone systems and voicemail call (866)206-2316 or email MasterTelephone@gmail.com
Memory Capacity of MEMDB-C1 .............................................................. 1-6 Table 1-2 System Capacity ................................................................................. 1-9 Table 2-1 KSU Packing List ................................................................................. 2-2 Table 2-2 Items on the CPU card .......................................................................... 2-2 Table 2-3 EXIFB-C1 Packing List .......................................................................... 2-7 Table 2-4 Connectors of EXIFB-C1 ........................................................................ 2-8 Table 2-5 Power Requirement ................................................... . .. .. . .. . .. . .. .. . .. . .. .. . . 2-12 Table 2-6 RJ61 Cable Connector Pin-Outs (J101-J103) ..............................................2-16 Table 2-7 IP4WW-Battery Box Packing List ................................................... . . .. . .. .. .2-17 Table 2-8 Battery Specifications ................................................... . .. .. . .. . .. .. . .. . .. .. . . 2-18 Table 2-9 Expansion Cards ................................................... . .. . .. .. . .. . .. .. . .. . .. .. . .. . . 2-38 Table 2-10 Expansion Card Packing List ................................................... .. .. . .. . .. .. .2-38 Table 2-11 RJ-61 Digital Connector Pin-Outs (J101, J102) ...........................................2-48 Table 2-12 RJ-61 Analog Pin-Outs (J101, J102) ................................................... . .. ..2-49 Table 2-13 RJ-61 CO/PF Pin-Outs (J2, J3) ................................................... . .. .. . .. . ..2-50 Table 2-14 RJ-61 BRI Pin-Outs (S-Bus, T-Bus) ................................................... . . .. ..2-51 Table 2-15 Switch Setting of 2BRIDB-C1 ................................................... .. .. . .. . .. .. .2-51 Table 2-16 RJ-45 PRI Pin-Outs (S-Bus, T-Bus) ................................................... . . .. ..2-53 Table 2-17 Switch Setting of 1PRIU-C1 ................................................... . .. . .. . .. . .. .. .2-53 Table 2-18 LED Indication ................................................... . . .. . .. .. . .. . .. .. . .. . .. .. . .. . . 2-54 Table 2-19 T1 LED Indications ................................................... .. . .. .. . .. . .. .. . .. . .. . .. . 2-55 Table 2-20 E1 LED Indications ................................................... .. . .. .. . .. . .. . .. .. . .. . .. . 2-56 Table 2-21 MEMDB-C1 Packing List ................................................... . .. . .. . .. .. . .. . .. . 2-58 Table 2-22 VOIPDB-C1 Packing List ................................................... . .. . .. . .. .. . .. . .. . 2-61 Table 2-23 VOIPDB LED Indications ................................................... . .. . .. . .. .. . .. . .. . 2-65 Table 2-24 Operation of VOIPDB LED Indic
PRI Pin-Outs (S-Bus, T-Bus) ................................................... . . .. ..2-53 Table 2-17 Switch Setting of 1PRIU-C1 ................................................... . .. . .. . .. . .. .. .2-53 Table 2-18 LED Indication ................................................... . . .. . .. .. . .. . .. .. . .. . .. .. . .. . . 2-54 Table 2-19 T1 LED Indications ................................................... .. . .. .. . .. . .. .. . .. . .. . .. . 2-55 Table 2-20 E1 LED Indications ................................................... .. . .. .. . .. . .. . .. .. . .. . .. . 2-56 Table 2-21 MEMDB-C1 Packing List ................................................... . .. . .. . .. .. . .. . .. . 2-58 Table 2-22 VOIPDB-C1 Packing List ................................................... . .. . .. . .. .. . .. . .. . 2-61 Table 2-23 VOIPDB LED Indications ................................................... . .. . .. . .. .. . .. . .. . 2-65 Table 2-24 Operation of VOIPDB LED Indications .....................................................2-66 Table 2-25 PZ-VM21 Packing List ................................................... . .. . .. . .. .. . .. . .. . .. . 2-66 Table 2-26 MultilineTelephone Functions (12TXH/24TXH/24TIXH (IP)) ............................2-71 Table 2-27 Doorphone Interface Specifications ................................................... .. . .. . 2-82 Table 2-28 RJ-61 General Purpose/Door Unlock Relay Control Connector (J7) ...................2-83 Table 2-29 General Purpose/Door Unlock Relay Specifications .....................................2-83 Table 2-30 External Paging Output Specifications .....................................................2-84 Table 2-31 BGM/External MOH Source Input Specifications .........................................2-85 Table 3-1 Start Up Method .................................................................................. 3-1 Table 4-1 Status LEDs ................................................... . .. . .. . .. .. . .. . .. .. . .. . .. .. . .. . .. . . 4-10 Table 4-2 CPU LED Indications ................................................... . . .. .. . .. . .. .. . .. . .. .. . . 4-12 Table 5-1 System Capacity ................................................................................. 5-1 Table 5-2 Operating Conditions ............................................................................ 5-3 Table 5-3 Power Requirement .............................................................................. 5-3 Table 5-4 Electrical Specifications of KSU ................................................................ 5-4 Table 5-5 IPTerminal Power Chart ........................................................................ 5-4 Table 5-6 IEEE802.af Class Specification ................................................................ 5-4 Table 5-7 Mechanical Specifications ...................................................................... 5-5 Table 5-8 Optional Unit Mechanical Specifications ...................................................... 5-5 Table 5-9 Doorphone Interface Specifications ........................................................... 5-5 Table 5-10 General Purpose/Door Unlock Relay Specifications ...................................... 5-6 Table 5-11 External Paging Output Specifications ....................................................... 5-6 Table 5-12 BGM/External MOH Source Input Specification
For AVAYA, NORSTAR, NEC, SAMSUNG, MITEL, PANASONIC, TOSHIBA telephone systems and voicemail call (866)206-2316 or email MasterTelephone@gmail.com
NEW TECHNOLOGIES.
New technologies in the realm of telephony bring communication advances that influence changes in business. Traditional imperatives in the telephony market are the cost effectiveness and ease of operation and maintenance; the latest generation technologies provides both without requiring significant technical training and support. Master Communications provides telephony solutions that fit the needs of small businesses to help accelerate business opportunities and provide better customer satisfaction with sophisticated service options - all the while, giving them full-control to manage the system for themselves. In the end, no matter what the size your business is, Master Communications delivers business critical solutions that give you a competitive advantage.
For AVAYA, NORSTAR, NEC, SAMSUNG, MITEL, PANASONIC, TOSHIBA telephone systems and voicemail call (866)206-2316 or email MasterTelephone@gmail.com
New technologies in the realm of telephony bring communication advances that influence changes in business. Traditional imperatives in the telephony market are the cost effectiveness and ease of operation and maintenance; the latest generation technologies provides both without requiring significant technical training and support. Master Communications provides telephony solutions that fit the needs of small businesses to help accelerate business opportunities and provide better customer satisfaction with sophisticated service options - all the while, giving them full-control to manage the system for themselves. In the end, no matter what the size your business is, Master Communications delivers business critical solutions that give you a competitive advantage.
For AVAYA, NORSTAR, NEC, SAMSUNG, MITEL, PANASONIC, TOSHIBA telephone systems and voicemail call (866)206-2316 or email MasterTelephone@gmail.com
Avaya 1600 Series
IP Deskphones
The Avaya 1600 Series IP Deskphones are a value-priced family of deskphones designed to meet basic communication needs in a low-cost package with the quality and reliability you expect from Avaya. The 1600 Series IP Deskphones are designed for the same user profiles as the top-of-the-line 9600 Series
IP Deskphones, thus offering a feature-set and price-point alternative. By providing a range of endpoints covering the differing needs of users at all price points, Avaya makes it possible for companies to equip their workforce with deskphones that look great, sound better, enhance productivity, and turn communications into a competitive advantage. With similar industrial design and administration, the 1600 Series and 9600 Series may be deployed in mixed environments or on their own.
• IP Deskphones for the value-oriented customer.
• Straightforward, familiar access to the most common telephony features.
• Cost effective, competitive price point.
• The quality and reliability you expect from Avaya.
For AVAYA, NORSTAR, NEC, SAMSUNG, MITEL, PANASONIC, TOSHIBA telephone systems and voicemail call (866)206-2316 or email MasterTelephone@gmail.com
NEC SL1100 SYSTEM CAPACITY
Table 5-1 System Capacity Items 1 KSU
(1228) 2 KSU
(2456) 3 KSU
(3684) Note
Expansion Slot 2 4 6
System Maximum Port 58 116 156 1KSU: 084M+PRI+080E+4COIDBx2 2KSU: (084M+PRI+080E)x2+4COIDBx4 3KSU: 084Mx3+PRIx2+080Ex4+4COIDBx7
Trunk Port Max. 38 76 88 1KSU: PRIx1+4COIDB/BRIx2 2KSU: PRIx2+4COIDB/BRIx4 3KSU: PRIx2+4COIDB/BRIx7
Trunk Port Analog Trunks
(COT) 12 24 36 1KSU: 4COIDBx3 on 084M/080E/008E
2KSU: 4COIDBx6 3KSU: 4COIDBx9
BRI (T-Point) 12 24 36 1KSU: 2BRIx3 on 084M/080E/008E 2KSU: 2BRIx6 3KSU: 2BRIx9
PRI (24B/30B) 24/30 48/60 48/60 Max. one PRI/KSU Max. two PRIs/system
IPTrunk
(SIP/H.323) 16 When MEMDB is Installed
Station Port Max. 40 80 120 1KSU: 084M+080Ex2+BRIx3 2KSU: 084Mx2+080Ex4+BRIx6 3KSU: 084Mx3+080Ex6+BRIx9For AVAYA, NORSTAR, NEC, SAMSUNG, MITEL, PANASONIC, TOSHIBA telephone systems and voicemail call (866)206-2316 or email MasterTelephone@gmail.com
Table 5-1 System Capacity Items 1 KSU
(1228) 2 KSU
(2456) 3 KSU
(3684) Note
Expansion Slot 2 4 6
System Maximum Port 58 116 156 1KSU: 084M+PRI+080E+4COIDBx2 2KSU: (084M+PRI+080E)x2+4COIDBx4 3KSU: 084Mx3+PRIx2+080Ex4+4COIDBx7
Trunk Port Max. 38 76 88 1KSU: PRIx1+4COIDB/BRIx2 2KSU: PRIx2+4COIDB/BRIx4 3KSU: PRIx2+4COIDB/BRIx7
Trunk Port Analog Trunks
(COT) 12 24 36 1KSU: 4COIDBx3 on 084M/080E/008E
2KSU: 4COIDBx6 3KSU: 4COIDBx9
BRI (T-Point) 12 24 36 1KSU: 2BRIx3 on 084M/080E/008E 2KSU: 2BRIx6 3KSU: 2BRIx9
PRI (24B/30B) 24/30 48/60 48/60 Max. one PRI/KSU Max. two PRIs/system
IPTrunk
(SIP/H.323) 16 When MEMDB is Installed
Station Port Max. 40 80 120 1KSU: 084M+080Ex2+BRIx3 2KSU: 084Mx2+080Ex4+BRIx6 3KSU: 084Mx3+080Ex6+BRIx9For AVAYA, NORSTAR, NEC, SAMSUNG, MITEL, PANASONIC, TOSHIBA telephone systems and voicemail call (866)206-2316 or email MasterTelephone@gmail.com
EQUIPMENT LIST
The following table lists all equipment for the SL1100 system.
ISSUE 1.0
Stock Number Equipment Name Equipment Description Note BE110267 IP4EU-1228M-B KSU w/o
C IP4EU-1228M-B KSU without AC Cable (for EMEA)
BE110268 IP4EU-1228M-B KSU IP4EU-1228M-B KSU with AC Cable (for EMEA)
BE110274 IP4WW-1228ME-B EXP
w/o C IP4WW-1228ME-B EXP without AC Cable
BE110275 IP4WW-1228ME-B EXP IP4WW-1228ME-B EXP with AC Cable
BE110258 IP4WW-EXIFB-C1 Expansion KSU Interface Unit, 3 jacks (two only are used)
BE110239 IP4WW-Battery Box External Battery Box without Batteries BE110253 IP4WW-080E-B1 8 Digital Extensions Interface BE110254 IP4WW-008E-B1 8 Analog Extensions Interface BE110256 IP4WW-4COIDB-B1 4 Analog Trunks Interface
BE110257 IP4WW-2BRIDB-C1 2 Basic Rate Interface, mounted on 084M-B1/080E- B1/008E-B1 board
BE110255 IP4WW-1PRIU-C1 1 Primary Rate Interface (PRI/E1/T1) BE110247 IP4EU-MEMDB-C1 Memory Expansion on CPU (for EMEA) BE110290 IP4WW-VOIPDB-C1 16-channel VOIP on CPU
BE106339 PZ-VM21 16 Channels for Voice Mail with a Single Channel V.34 Modem
BE110730 IP4WW-CFVRS-C1 Compact Flash for VRS (VRS: 4ch (default))
BE110731 IP4WW-CFVMS-C1 Compact Flash for VRS and InMail ( Approx. 15 hours, VRS: 4ch (default)/InMail: 2ch (default))
BE110732 IP4WW-CFVML-C1 Compact Flash for VRS and InMail ( Approx. 40 hours, VRS: 4ch (default)/InMail: 4ch (default))
BE110269 IP4WW-12TXH-B-TEL
(WH) 2-wire 12-key MultilineTelephone
BE110270 IP4WW-12TXH-B-TEL (BK)
BE110271 IP4WW-24TXH-B-TEL
(WH) 2-wire 24-key MultilineTelephone
BE110272 IP4WW-24TXH-B-TEL (BK)
BE110277 IP4WW-24TIXH-C-TEL
(WH) 24-Keys, Multiline IPTelephone
BE110278 IP4WW-24TIXH-C-TEL (BK)
BE110285 IP4WW-60D DSS-B
CONSOLE (WH) 60-button Direct Station Selection (DSS) Console
BE110286 IP4WW-60D DSS-B CONSOLE (BK)
BE108045 DP-D-1D Doorphone BE109741 DX4NA Doorphone Doorphone BE109742 HS.D503DOR-A DoorphoneFor AVAYA, NORSTAR, NEC, SAMSUNG, MITEL, PANASONIC, TOSHIBA telephone systems and voicemail call (866)206-2316 or email MasterTelephone@gmail.com
EQUIPMENT LIST
The following table lists all equipment for the SL1100 system.
ISSUE 1.0
Stock Number Equipment Name Equipment Description Note BE110267 IP4EU-1228M-B KSU w/o
C IP4EU-1228M-B KSU without AC Cable (for EMEA)
IP4EU-CPU-B1, IP4WW-084M-B1, Power Supply
BE110268 IP4EU-1228M-B KSU IP4EU-1228M-B KSU with AC Cable (for EMEA) IP4EU-CPU-B1, IP4WW-084M-B1, Power Supply
BE110274 IP4WW-1228ME-B EXP
w/o C IP4WW-1228ME-B EXP without AC Cable
IP4WW-EXIFE-C1, IP4WW-084M-B1, Power Supply
BE110275 IP4WW-1228ME-B EXP IP4WW-1228ME-B EXP with AC Cable IP4WW-EXIFE-C1, IP4WW-084M-B1, Power Supply
BE110258 IP4WW-EXIFB-C1 Expansion KSU Interface Unit, 3 jacks (two only are used)
BE110239 IP4WW-Battery Box External Battery Box without Batteries BE110253 IP4WW-080E-B1 8 Digital Extensions Interface BE110254 IP4WW-008E-B1 8 Analog Extensions Interface BE110256 IP4WW-4COIDB-B1 4 Analog Trunks Interface
BE110257 IP4WW-2BRIDB-C1 2 Basic Rate Interface, mounted on 084M-B1/080E- B1/008E-B1 board
BE110255 IP4WW-1PRIU-C1 1 Primary Rate Interface (PRI/E1/T1) BE110247 IP4EU-MEMDB-C1 Memory Expansion on CPU (for EMEA) BE110290 IP4WW-VOIPDB-C1 16-channel VOIP on CPU
BE106339 PZ-VM21 16 Channels for Voice Mail with a Single Channel V.34 Modem
BE110730 IP4WW-CFVRS-C1 Compact Flash for VRS (VRS: 4ch (default))
BE110731 IP4WW-CFVMS-C1 Compact Flash for VRS and InMail ( Approx. 15 hours, VRS: 4ch (default)/InMail: 2ch (default))
BE110732 IP4WW-CFVML-C1 Compact Flash for VRS and InMail ( Approx. 40 hours, VRS: 4ch (default)/InMail: 4ch (default))
BE110269 IP4WW-12TXH-B-TEL
(WH) 2-wire 12-key MultilineTelephone
BE110270 IP4WW-12TXH-B-TEL (BK)
BE110271 IP4WW-24TXH-B-TEL
(WH) 2-wire 24-key MultilineTelephone
BE110272 IP4WW-24TXH-B-TEL (BK)
BE110277 IP4WW-24TIXH-C-TEL
(WH) 24-Keys, Multiline IPTelephone
BE110278 IP4WW-24TIXH-C-TEL (BK)
BE110285 IP4WW-60D DSS-B
CONSOLE (WH) 60-button Direct Station Selection (DSS) Console
BE110286 IP4WW-60D DSS-B CONSOLE (BK)
BE108045 DP-D-1D Doorphone BE109741 DX4NA Doorphone Doorphone BE109742 HS.D503DOR-A DoorphoneFor AVAYA, NORSTAR, NEC, SAMSUNG, MITEL, PANASONIC, TOSHIBA telephone systems and voicemail call (866)206-2316 or email MasterTelephone@gmail.com
The following table lists all equipment for the SL1100 system.
ISSUE 1.0
Stock Number Equipment Name Equipment Description Note BE110267 IP4EU-1228M-B KSU w/o
C IP4EU-1228M-B KSU without AC Cable (for EMEA)
BE110268 IP4EU-1228M-B KSU IP4EU-1228M-B KSU with AC Cable (for EMEA)
BE110274 IP4WW-1228ME-B EXP
w/o C IP4WW-1228ME-B EXP without AC Cable
BE110275 IP4WW-1228ME-B EXP IP4WW-1228ME-B EXP with AC Cable
BE110258 IP4WW-EXIFB-C1 Expansion KSU Interface Unit, 3 jacks (two only are used)
BE110239 IP4WW-Battery Box External Battery Box without Batteries BE110253 IP4WW-080E-B1 8 Digital Extensions Interface BE110254 IP4WW-008E-B1 8 Analog Extensions Interface BE110256 IP4WW-4COIDB-B1 4 Analog Trunks Interface
BE110257 IP4WW-2BRIDB-C1 2 Basic Rate Interface, mounted on 084M-B1/080E- B1/008E-B1 board
BE110255 IP4WW-1PRIU-C1 1 Primary Rate Interface (PRI/E1/T1) BE110247 IP4EU-MEMDB-C1 Memory Expansion on CPU (for EMEA) BE110290 IP4WW-VOIPDB-C1 16-channel VOIP on CPU
BE106339 PZ-VM21 16 Channels for Voice Mail with a Single Channel V.34 Modem
BE110730 IP4WW-CFVRS-C1 Compact Flash for VRS (VRS: 4ch (default))
BE110731 IP4WW-CFVMS-C1 Compact Flash for VRS and InMail ( Approx. 15 hours, VRS: 4ch (default)/InMail: 2ch (default))
BE110732 IP4WW-CFVML-C1 Compact Flash for VRS and InMail ( Approx. 40 hours, VRS: 4ch (default)/InMail: 4ch (default))
BE110269 IP4WW-12TXH-B-TEL
(WH) 2-wire 12-key MultilineTelephone
BE110270 IP4WW-12TXH-B-TEL (BK)
BE110271 IP4WW-24TXH-B-TEL
(WH) 2-wire 24-key MultilineTelephone
BE110272 IP4WW-24TXH-B-TEL (BK)
BE110277 IP4WW-24TIXH-C-TEL
(WH) 24-Keys, Multiline IPTelephone
BE110278 IP4WW-24TIXH-C-TEL (BK)
BE110285 IP4WW-60D DSS-B
CONSOLE (WH) 60-button Direct Station Selection (DSS) Console
BE110286 IP4WW-60D DSS-B CONSOLE (BK)
BE108045 DP-D-1D Doorphone BE109741 DX4NA Doorphone Doorphone BE109742 HS.D503DOR-A DoorphoneFor AVAYA, NORSTAR, NEC, SAMSUNG, MITEL, PANASONIC, TOSHIBA telephone systems and voicemail call (866)206-2316 or email MasterTelephone@gmail.com
EQUIPMENT LIST NEC 1100
The following table lists all equipment for the SL1100 system.
ISSUE 1.0
Stock Number Equipment Name Equipment Description Note BE110267 IP4EU-1228M-B KSU w/o
C IP4EU-1228M-B KSU without AC Cable (for EMEA)
BE110268 IP4EU-1228M-B KSU IP4EU-1228M-B KSU with AC Cable (for EMEA)
BE110274 IP4WW-1228ME-B EXP
w/o C IP4WW-1228ME-B EXP without AC Cable
BE110275 IP4WW-1228ME-B EXP IP4WW-1228ME-B EXP with AC Cable
BE110258 IP4WW-EXIFB-C1 Expansion KSU Interface Unit, 3 jacks (two only are used)
BE110239 IP4WW-Battery Box External Battery Box without Batteries BE110253 IP4WW-080E-B1 8 Digital Extensions Interface BE110254 IP4WW-008E-B1 8 Analog Extensions Interface BE110256 IP4WW-4COIDB-B1 4 Analog Trunks Interface
BE110257 IP4WW-2BRIDB-C1 2 Basic Rate Interface, mounted on 084M-B1/080E- B1/008E-B1 board
BE110255 IP4WW-1PRIU-C1 1 Primary Rate Interface (PRI/E1/T1) BE110247 IP4EU-MEMDB-C1 Memory Expansion on CPU (for EMEA) BE110290 IP4WW-VOIPDB-C1 16-channel VOIP on CPU
BE106339 PZ-VM21 16 Channels for Voice Mail with a Single Channel V.34 Modem
BE110730 IP4WW-CFVRS-C1 Compact Flash for VRS (VRS: 4ch (default))
BE110731 IP4WW-CFVMS-C1 Compact Flash for VRS and InMail ( Approx. 15 hours, VRS: 4ch (default)/InMail: 2ch (default))
BE110732 IP4WW-CFVML-C1 Compact Flash for VRS and InMail ( Approx. 40 hours, VRS: 4ch (default)/InMail: 4ch (default))
BE110269 IP4WW-12TXH-B-TEL
(WH) 2-wire 12-key MultilineTelephone
BE110270 IP4WW-12TXH-B-TEL (BK)
BE110271 IP4WW-24TXH-B-TEL
(WH) 2-wire 24-key MultilineTelephone
BE110272 IP4WW-24TXH-B-TEL (BK)
BE110277 IP4WW-24TIXH-C-TEL
(WH) 24-Keys, Multiline IPTelephone
BE110278 IP4WW-24TIXH-C-TEL (BK)
BE110285 IP4WW-60D DSS-B
CONSOLE (WH) 60-button Direct Station Selection (DSS) Console
BE110286 IP4WW-60D DSS-B CONSOLE (BK)
BE108045 DP-D-1D Doorphone BE109741 DX4NA Doorphone Doorphone BE109742 HS.D503DOR-A Doorphone
For AVAYA, NORSTAR, NEC, SAMSUNG, MITEL, PANASONIC, TOSHIBA telephone systems and voicemail call (866)206-2316 or email MasterTelephone@gmail.com
PCMCIA For Samsung 7400
The PCMCIA slot supports the CardBus (Card-32) card standard and 16-bit (PCMCIA 2.1/JEIDA
4.2) card standard. The slot supports +3.3 V, +5 V, and +12 V at a working voltage of 120 mA~1100 mA. Wireless LAN card expansion is optional. The wireless LAN card provided by Moxa lets you connect the UC-7400 to a wireless LAN, with both 802.1b and 802.11g interfaces supported. If you need device drivers for other kinds of PCMCIA cards, contact Moxa for information on how to initiate a cooperative development project.
CompactFlash
The UC-7400 provides one CompactFlash slot that supports CompactFlash type I/II card expansion. Currently, Moxa provides a CompactFlash disk for plug & play mass storage expansion. You may also use flash disks available from most computer supply outlets. The CompactFlash card is automatically mounted as a system partition on insertion.
If you need device drivers for other kinds of mass storage cards, contact Moxa for information on how to initiate a cooperative development project.
USB
The UC-7420 provides two USB 2.0 Hosts and one USB 1.1 Client. The USB Host now supports adding USB storage devices.Reset-type Buttons
The UC-7400 computers have two reset-type buttons. The button labeled Reset has the same effect as switching off the power and then switching the power back on. The button labeled Reset to default returns the UC-7400 to its factory default configuration.
Reset Button
Pressing the Reset button initiates a hardware reboot. The button plays the same role as a desktop PC’s reset button.
In normal use, you should NOT use the Reset Button. You should only use this function if the software is not working properly. To reset an embedded Linux system, always use the software reboot command />reboot to protect the integrity of the data being transmitted or processed.
Reset to Default Button
Press the Reset to default button continuously for at least 5 seconds to load the factory default configuration. After the factory default configuration has been loaded, the system will reboot automatically. The Ready LED will blink on and off for the first 5 seconds, and then maintain a steady glow once the system has rebooted.
We recommend that you only use this function if the software is not working properly and you want to load factory default settings. To reset an embedded Linux system, always use the software reboot command />reboot to protect the integrity of data being transmitted or processed. The Reset to default button is not designed to hard reboot the UC-7400.For AVAYA, NORSTAR, NEC, SAMSUNG, MITEL, PANASONIC, TOSHIBA telephone systems and voicemail call (866)206-2316 or email MasterTelephone@gmail.com
The PCMCIA slot supports the CardBus (Card-32) card standard and 16-bit (PCMCIA 2.1/JEIDA
4.2) card standard. The slot supports +3.3 V, +5 V, and +12 V at a working voltage of 120 mA~1100 mA. Wireless LAN card expansion is optional. The wireless LAN card provided by Moxa lets you connect the UC-7400 to a wireless LAN, with both 802.1b and 802.11g interfaces supported. If you need device drivers for other kinds of PCMCIA cards, contact Moxa for information on how to initiate a cooperative development project.
CompactFlash
The UC-7400 provides one CompactFlash slot that supports CompactFlash type I/II card expansion. Currently, Moxa provides a CompactFlash disk for plug & play mass storage expansion. You may also use flash disks available from most computer supply outlets. The CompactFlash card is automatically mounted as a system partition on insertion.
If you need device drivers for other kinds of mass storage cards, contact Moxa for information on how to initiate a cooperative development project.
USB
The UC-7420 provides two USB 2.0 Hosts and one USB 1.1 Client. The USB Host now supports adding USB storage devices.Reset-type Buttons
The UC-7400 computers have two reset-type buttons. The button labeled Reset has the same effect as switching off the power and then switching the power back on. The button labeled Reset to default returns the UC-7400 to its factory default configuration.
Reset Button
Pressing the Reset button initiates a hardware reboot. The button plays the same role as a desktop PC’s reset button.
In normal use, you should NOT use the Reset Button. You should only use this function if the software is not working properly. To reset an embedded Linux system, always use the software reboot command />reboot to protect the integrity of the data being transmitted or processed.
Reset to Default Button
Press the Reset to default button continuously for at least 5 seconds to load the factory default configuration. After the factory default configuration has been loaded, the system will reboot automatically. The Ready LED will blink on and off for the first 5 seconds, and then maintain a steady glow once the system has rebooted.
We recommend that you only use this function if the software is not working properly and you want to load factory default settings. To reset an embedded Linux system, always use the software reboot command />reboot to protect the integrity of data being transmitted or processed. The Reset to default button is not designed to hard reboot the UC-7400.For AVAYA, NORSTAR, NEC, SAMSUNG, MITEL, PANASONIC, TOSHIBA telephone systems and voicemail call (866)206-2316 or email MasterTelephone@gmail.com
Reset-type Buttons for Samsung 7400
The UC-7400 computers have two reset-type buttons. The button labeled Reset has the same effect as switching off the power and then switching the power back on. The button labeled Reset to default returns the UC-7400 to its factory default configuration.
Reset Button
Pressing the Reset button initiates a hardware reboot. The button plays the same role as a desktop PC’s reset button.
In normal use, you should NOT use the Reset Button. You should only use this function if the software is not working properly. To reset an embedded Linux system, always use the software reboot command />reboot to protect the integrity of the data being transmitted or processed.
Reset to Default Button
Press the Reset to default button continuously for at least 5 seconds to load the factory default configuration. After the factory default configuration has been loaded, the system will reboot automatically. The Ready LED will blink on and off for the first 5 seconds, and then maintain a steady glow once the system has rebooted.
We recommend that you only use this function if the software is not working properly and you want to load factory default settings. To reset an embedded Linux system, always use the software reboot command />reboot to protect the integrity of data being transmitted or processed. The Reset to default button is not designed to hard reboot the UC-7400.
For AVAYA, NORSTAR, NEC, SAMSUNG, MITEL, PANASONIC, TOSHIBA telephone systems and voicemail call (866)206-2316 or email MasterTelephone@gmail.com
The UC-7400 computers have two reset-type buttons. The button labeled Reset has the same effect as switching off the power and then switching the power back on. The button labeled Reset to default returns the UC-7400 to its factory default configuration.
Reset Button
Pressing the Reset button initiates a hardware reboot. The button plays the same role as a desktop PC’s reset button.
In normal use, you should NOT use the Reset Button. You should only use this function if the software is not working properly. To reset an embedded Linux system, always use the software reboot command />reboot to protect the integrity of the data being transmitted or processed.
Reset to Default Button
Press the Reset to default button continuously for at least 5 seconds to load the factory default configuration. After the factory default configuration has been loaded, the system will reboot automatically. The Ready LED will blink on and off for the first 5 seconds, and then maintain a steady glow once the system has rebooted.
We recommend that you only use this function if the software is not working properly and you want to load factory default settings. To reset an embedded Linux system, always use the software reboot command />reboot to protect the integrity of data being transmitted or processed. The Reset to default button is not designed to hard reboot the UC-7400.
For AVAYA, NORSTAR, NEC, SAMSUNG, MITEL, PANASONIC, TOSHIBA telephone systems and voicemail call (866)206-2316 or email MasterTelephone@gmail.com
WAN/LAN Function
OfficeServ 7400 has the interface module with WAN and LAN mounted so that the data can be transmitted/received in the external internet or the internal intranet with no additional data device.(10/100 BASE-T or 1000 BASE-TX/SX/LX interface used)
Wireless LAN Service
OfficeServ 7400 provides the wireless LAN solution for the combined services of the wired and the wireless in the office zone. It supports the handoff and the QoS by using the Combo AP(Access Point) that performs the service with the separation of the data and the voice. In addition, OfficeServ 7400 uses the wireless LAN base station to use the wired and wireless voice/data communication with no additional LAN construction. In addition, it provides the business environment where the staff can perform their efficient and prompt businesses anytime anywhere by using the portable terminal of the refined design.
Text-To Speech (TTS) Response Functions
OfficeServ 7400 provides the TTS response functions that converges the character messages(e-mail) into the voice message to be heard via the phone.
Mail Server and Instant Messaging
OfficeServ 7400 provides the e-mail server and the instant message transmission/reception function that combines the voice message and the e-mail to converge or to retransmit them for the users’ convenience.
Various Application Solutions
OfficeServ 7400 provides the various application solutions such as OfficeServ News, OfficeServ EasySet, Internet Call Center, Integrated Management of the Communication System, Voice Mail Solution of the Built-in Board type, the integrated fax server, Closely- Combined Digital Record System, eFor AVAYA, NORSTAR, NEC, SAMSUNG, MITEL, PANASONIC, TOSHIBA telephone systems and voicemail call (866)206-2316 or email MasterTelephone@gmail.com
OfficeServ 7400 has the interface module with WAN and LAN mounted so that the data can be transmitted/received in the external internet or the internal intranet with no additional data device.(10/100 BASE-T or 1000 BASE-TX/SX/LX interface used)
Wireless LAN Service
OfficeServ 7400 provides the wireless LAN solution for the combined services of the wired and the wireless in the office zone. It supports the handoff and the QoS by using the Combo AP(Access Point) that performs the service with the separation of the data and the voice. In addition, OfficeServ 7400 uses the wireless LAN base station to use the wired and wireless voice/data communication with no additional LAN construction. In addition, it provides the business environment where the staff can perform their efficient and prompt businesses anytime anywhere by using the portable terminal of the refined design.
Text-To Speech (TTS) Response Functions
OfficeServ 7400 provides the TTS response functions that converges the character messages(e-mail) into the voice message to be heard via the phone.
Mail Server and Instant Messaging
OfficeServ 7400 provides the e-mail server and the instant message transmission/reception function that combines the voice message and the e-mail to converge or to retransmit them for the users’ convenience.
Various Application Solutions
OfficeServ 7400 provides the various application solutions such as OfficeServ News, OfficeServ EasySet, Internet Call Center, Integrated Management of the Communication System, Voice Mail Solution of the Built-in Board type, the integrated fax server, Closely- Combined Digital Record System, eFor AVAYA, NORSTAR, NEC, SAMSUNG, MITEL, PANASONIC, TOSHIBA telephone systems and voicemail call (866)206-2316 or email MasterTelephone@gmail.com
Universal Board OfgiceServ 7400
On the universal slot of the OfficeServ 7400 System, the board providing the various services can be mounted. Universal boards can be classified into four types of voice trunk line board, the voice internal line board, the voice application board, and the data board according to the provided services.
Types of Universal Boards Board Types Board Name Voice Trunk Line Board 8TRK, TEPRI, TEPRI2
Voice Internal LIne Board 8SLI, 16SLI, 16SLI2, 16MWSLI, 8HYB, 8HYB2, 8DLI,
16DLI, 16DLI2
Voice Application Board MGI, MGI64, 4DSL, 4WLI
Data Board LIM, PLIM, GPLIM, GSIM, GWIM
For AVAYA, NORSTAR, NEC, SAMSUNG, MITEL, PANASONIC, TOSHIBA telephone systems and voicemail call (866)206-2316 or email MasterTelephone@gmail.com
Universal Board for SAMSUNG 7400
On the universal slot of the OfficeServ 7400 System, the board providing the various services can be mounted. Universal boards can be classified into four types of voice trunk line board, the voice internal line board, the voice application board, and the data board according to the provided services.
Table 2.1 Types of Universal Boards Board Types Board Name Voice Trunk Line Board 8TRK, TEPRI, TEPRI2
Voice Internal LIne Board 8SLI, 16SLI, 16SLI2, 16MWSLI, 8HYB, 8HYB2, 8DLI,
16DLI, 16DLI2
Voice Application Board MGI, MGI64, 4DSL, 4WLI
Data Board LIM, PLIM, GPLIM, GSIM, GWIM
2.5.1 8TRK board
8TRK board is the trunk line board of eight ports, which is mounted on the universal slot. To each port, the general line or the private switch, or the general phone lines of other keyphone system can be connected. 8TRK board performs the functions of Real driver, Ring detection, TSAC, and CODEC control via TMC ASIC.For AVAYA, NORSTAR, NEC, SAMSUNG, MITEL, PANASONIC, TOSHIBA telephone systems and voicemail call (866)206-2316 or email MasterTelephone@gmail.com
On the universal slot of the OfficeServ 7400 System, the board providing the various services can be mounted. Universal boards can be classified into four types of voice trunk line board, the voice internal line board, the voice application board, and the data board according to the provided services.
Table 2.1 Types of Universal Boards Board Types Board Name Voice Trunk Line Board 8TRK, TEPRI, TEPRI2
Voice Internal LIne Board 8SLI, 16SLI, 16SLI2, 16MWSLI, 8HYB, 8HYB2, 8DLI,
16DLI, 16DLI2
Voice Application Board MGI, MGI64, 4DSL, 4WLI
Data Board LIM, PLIM, GPLIM, GSIM, GWIM
2.5.1 8TRK board
8TRK board is the trunk line board of eight ports, which is mounted on the universal slot. To each port, the general line or the private switch, or the general phone lines of other keyphone system can be connected. 8TRK board performs the functions of Real driver, Ring detection, TSAC, and CODEC control via TMC ASIC.For AVAYA, NORSTAR, NEC, SAMSUNG, MITEL, PANASONIC, TOSHIBA telephone systems and voicemail call (866)206-2316 or email MasterTelephone@gmail.com
WAN/LAN Function Samsung 7400.
OfficeServ 7400 has the interface module with WAN and LAN mounted so that the data can be transmitted/received in the external internet or the internal intranet with no additional data device.(10/100 BASE-T or 1000 BASE-TX/SX/LX interface used)
Wireless LAN Service
OfficeServ 7400 provides the wireless LAN solution for the combined services of the wired and the wireless in the office zone. It supports the handoff and the QoS by using the Combo AP(Access Point) that performs the service with the separation of the data and the voice. In addition, OfficeServ 7400 uses the wireless LAN base station to use the wired and wireless voice/data communication with no additional LAN construction. In addition, it provides the business environment where the staff can perform their efficient and prompt businesses anytime anywhere by using the portable terminal of the refined design.
Text-To Speech (TTS) Response Functions
OfficeServ 7400 provides the TTS response functions that converges the character messages(e-mail) into the voice message to be heard via the phone.
Mail Server and Instant Messaging
OfficeServ 7400 provides the e-mail server and the instant message transmission/reception function that combines the voice message and the e-mail to converge or to retransmit them for the users’ convenience.
Various Application Solutions
OfficeServ 7400 provides the various application solutions such as OfficeServ News, OfficeServ EasySet, Internet Call Center, Integrated Management of the Communication System, Voice Mail Solution of the Built-in Board type, the integrated fax server, Closely- Combined Digital Record System.
For AVAYA, NORSTAR, NEC, SAMSUNG, MITEL, PANASONIC, TOSHIBA telephone systems and voicemail call (866)206-2316 or email MasterTelephone@gmail.com
Auto Attendant Samsung 7400
Announcement Replay and Auto Call Forward
y This system replays the announcement when a calling party is connected to the auto at- tendant. This announcement can be specified based on holidays, working hours, or non- working hour.
y The auto call forward connects a calling party to the desired subscriber’s station when the calling party dials a station number in the auto attendant. In this case, the call routing function will be also provided: this detects whether the entered phone number is valid, or that the length of the phone number can be changed.
Announcement Auto Change Based on the Schedule
Allows the administrator to automatically change and replay the announcement based on holidays, working hours, and non-working hours.
Announcement Change by Telephone
Allows the administrator to change the announcement by interfacing to the auto attendant from a remote site.
Call Forwarding to the Mailbox on the Busy Line
When a calling party interfaces to the auto attendant and tries to connect the call to a busy station, the called party on the busy station can use this function to forward the call to the voice mailbox.
Queuing Process on the Busy Line
When a calling party interfaces to the auto attendant and tries to connect a call to a busy station, and the ‘Call Forwarding to the Mailbox on the Busy Line’ function is not set (see above), a ‘please hold’ message is played and the connection is retried for a specified time. If the line continues busy after the maximum retry time, another voice message is provided asking the caller to either forward the call to the voice mailbox or hang up.
For AVAYA, NORSTAR, NEC, SAMSUNG, MITEL, PANASONIC, TOSHIBA telephone systems and voicemail call (866)206-2316 or email MasterTelephone@gmail.com
Switches
802.1w Rapid Spanning Tree
Rapid Spanning Tree Protocol (RSTP) provides rapid convergence of the spanning tree and provides for fast reconfiguration, critical for networks carrying delay-sensitive traffic such as voice and video. The specification for RSTP is IEEE 802.1w-2001. The RSTP specifica- tion provides compatibility with legacy STP-based networks.
802.1p Packet Priority
The switch extracts the priority field from the Ethernet frame configured according to the 802.1p specification standard, and discriminatively processes the frame according to the priority of the specified operation standard.
The packets are categorized into emergent packets and non-emergent packets and are proc- essed.
VLAN (802.1Q)
The Virtual Local Area Network (VLAN) groups related equipment by work group accord- ing to the LAN operational policy, regardless of the location of the equipment. The VLAN also processes switching for work groups. The VLAN removes the effects of unnecessary broadcasting packets and configures the stable switching subnet only for the corresponding group by separating and processing the group in the virtual LAN.
Accordingly, the switch can provide the differentiated QoS services and the VLAN can be configured based on the switch port and MAC address.
The system automatically configures the VLAN for IP phones, signal processing gateway, media gateway, and UMS required for OfficeServ 7400 services, and performs the QoS process. OfficeServ 7400 provides 32 VLAN groups.
IGMP Snooping
The L2 switch (located in the lower layer of the IP router) can process IGMP (Internet Group Management Protocol) messages to allow Multicasting to be used. This is referred to as IGMP Snooping.
The IP layer multicast group information included in the IGMP message is reflected in the MAC filtering database, its own switching database. The group information is processed in the MAC multicast address format mapped with the IP multicast address.
802.1x Supported
IEEE 802.1x standards define the formats and the operational procedures of EAP over LAN (EAPoL) frame that can send/receive the Extensible Authentication Protocol (EAP) between terminals and the Access Point (AP). These standards are called the port security protocol because they can be used in the procedure permitting network access by the termi- nal only by acquiring the physical port license of the Bridge or wireless AP from the au- thentication server. This authentication procedure by ports enables control of charging poli- cies, usage restriction, band allocation, etc, separately.
Port Trunking Function Supported
Port Trunking means Port Aggregation, the collection of physical ports into logical ones. That is, like the 100 BASE-TX securing 100Mbps bandwidth, the function collects several ports into a logical port for expanding the bandwidth to be used.
PoE (IEEE 802.3af) Function Supported
Power over Ethernet (PoE) is designed so that no additional power supply to network equipment used in wireless or wired LAN is necessary. PoE allows the user to send the data and the power simultaneously via an Ethernet cable, thus reducing the installation cost in most cases and providing high flexibility in selecting the installation site for the equip- ment.
QoS Function Supported
OfficeServ 7400 provides the 802.1p Packet Priority and Level Classification Setup for supporting Quality of Service (QoS). The 802.1p Packet Priority is the expansion of the standard MAC header in the network packet. This expansion provides the packets with pri- ority: a packet of higher priority is treated preferentially and is processed ahead of a packet of lower priority. The Level Classification Setup function gives the packets High/Low lev- els and processes them according to these levels, thus making the differential services pos- sible.
GARP/GVRP Function Supported
Generic Attribute Registration Protocol (GARP)/Generic VLAN Registration Proto-
col (GVRP) define a GARP application that provides the 802.1Q-compliant VLAN prun- ing and dynamic VLAN creation on 802.1Q trunk ports. GVRP is an application defined in the IEEE 802.1P standard that allows for the control of 802.1Q VLANs.
4-4 © Samsung Business Communications.
Routers
Various Network Interface
OfficeServ 7400 provides the E0, E1, and E2 network interfaces (which are connected to the WAN through the Ethernet interface), and the serial network connected through the V.35, HSSI serial interface.
Static Routing
The OfficeServ 7400 configures a fixed routing table between each network interface to process the static routing. In this case, the routing table cannot be dynamically changed by the routing protocol, and specific routing services will be provided according to the pre-set routing policy.
WAN Interface (Ethernet, PPPoE, DHCP Client)
E0, E1, E2 Ethernet WAN Interface enables connection to the Internet using the Static IP, PPPoE, and DHCP client protocol.
V.35 Interface (PPP, HDLC, Frame Relay)
The OfficeServ 7400 accesses the Internet through the V.35 serial interface with a transfer speed of up to 2Mbps. In this case, the OfficeServ 7400 supports various environments us- ing functions such as PPP, HDLC, and Frame Relay Encapsulation.
HSSI Interface (PPP, HDLC, Frame Relay)
The Internet can be connected via the High Speed Serial Interface (HSSI) with a maximum transmission speed of 52Mbps. Generally, HSSI can use the equipment on a token-ring and Ethernet network for connecting to the equipment operating at the speed of a Synchronous Optical Network (SONET) OC-1 or T3 circuit.
Routing Protocol
The OfficeServ 7400 supports the ‘routing information exchanging’ protocol to react to network environmental change and to effectively process the routing.
y Routing Information Protocol version1 (RIPv1), RIPv2
These protocols are widely used for managing the routing information in a mid-size in- dependent network such as a group of LANs.
y Open Shortest Path First version2 (OSPFv2)
This routing protocol is used prior to the RIP in a large-size independent network. A router detects and reports any change in the routing table or the network to other routers. In this way, all routers share the same routing information.
y BGP4 (Border Gateway Protocol 4)
As an Exterior Gateway Protocol through which the Autonomous System (AS) sends/receives the routing information between other networks, Version 4 of BGP is cur- rently used. BGP4 uses various matrixes when selecting the optimized path to the destina- tion. BGP4 compares each matrix having priority and selects the optimized path.
Multicast Routing
y Internet Group Management Protocol (IGMP)
Internet Group Management Protocol (IGMP) protocol manages the multicast group op- erating at one Ethernet segment. It controls the segment so that a user can subscribe or secede as a member of the specific multicast group.
y Distance Vector Multicast Routing Protocol (DVMRP)
Distance Vector Multicast Routing Protocol(DVMRP) protocol supports the transmis- sion of multicast data in a network. This protocol sends the multicast data in a unicast packet format, and the packets are reassembled into multicast data at the destination. DVMRP can be operated in various network formats, including Ethernet, and can even be operated via routers that do not support multicast data. y Protocol Independent Multicast-Sparse Mode (PIM-SM) PIM-SM is designed to route multicast packets into multicast groups and to construct the allocation tree efficiently at WAN. This optimizes the number of data streams that can occur in this environment.
Routing between VLAN Groups
Communication between VLAN groups is done through routing between the groups.
HTBQ/Bandwidth on Demand (BoD)
The queuing process is differentially performed according to the level table where the routing process priority for a data server is defined.
RTP Priority
The RTP (Real-Time Transport Protocol) packet is a VoIP media packet. The queuing proc- ess for the RTP packet is prior to that for other data packets, which helps to maintain the tone quality. This function is useful when using the VoIP function in a network where the VoIP packet that should be processed in real time and other packets for general office work are mixed.
IP-ToS Process
This function checks the ToS (Type of Service) field of the IP header and processes it ac- cording to priority of the corresponding routing in the data server. This function reproduces the ToS field flowing into the data server, performs the routing process first of all, and heightens the process priority in the next HOFor AVAYA, NORSTAR, NEC, SAMSUNG, MITEL, PANASONIC, TOSHIBA telephone systems and voicemail call (866)206-2316 or email MasterTelephone@gmail.com
Do Not Disturb IP Office AVAYA
Use this feature to be able to press a programmed button to prevent incoming calls for the extension from ringing (LEDs/ LCD still flash). When Do Not Disturb is on, external callers hear ringing while internal callers hear a busy signal. You should use Do Not Disturb only if someone answers external calls for your extension when you do not answer them.
You can configure do not disturb exceptions. These are numbers that are still able to call even when do not disturb is on. [OBJECT]
· This function is only supported on a button that includes LED/LCD indicator. The indicator is lit when the function is enabled.
· If the user has this feature enabled, removing this button with turn the feature off.
· To access this function without a programmable button, press FEATURE and then dial 01. · Do not disturb overrides call forwarding.
· To access this function without a programmable button: · On DS and ETR phones, press FEATURE and dial 01. · On BST phones, press FEATURE and dial 85 (on) or #85 (off).
For AVAYA, NORSTAR, NEC, SAMSUNG, MITEL, PANASONIC, TOSHIBA telephone systems and voicemail call (866)206-2316 or email MasterTelephone@gmail.com
Use this feature to be able to press a programmed button to prevent incoming calls for the extension from ringing (LEDs/ LCD still flash). When Do Not Disturb is on, external callers hear ringing while internal callers hear a busy signal. You should use Do Not Disturb only if someone answers external calls for your extension when you do not answer them.
You can configure do not disturb exceptions. These are numbers that are still able to call even when do not disturb is on. [OBJECT]
· This function is only supported on a button that includes LED/LCD indicator. The indicator is lit when the function is enabled.
· If the user has this feature enabled, removing this button with turn the feature off.
· To access this function without a programmable button, press FEATURE and then dial 01. · Do not disturb overrides call forwarding.
· To access this function without a programmable button: · On DS and ETR phones, press FEATURE and dial 01. · On BST phones, press FEATURE and dial 85 (on) or #85 (off).
For AVAYA, NORSTAR, NEC, SAMSUNG, MITEL, PANASONIC, TOSHIBA telephone systems and voicemail call (866)206-2316 or email MasterTelephone@gmail.com
This provides information about programming from a PARTNER-34D telephone to MLS telephones and from an MLS-34D telephone to PARTNER telephones. In these situations, be aware that the button that you press at extension 10 or 11 (the programming extension) is likely to be in a different location than the button on the telephone to which the programming applies (the target telephone). If you are programming from a PARTNER-18D or MLS-18D telephone, the button locations are the same.
You can use the illustrations in this appendix to facilitate programming from one telephone type to the other. Figure D-1 shows the buttons on the PARTNER-34D Programming Overlay and the relative location of those buttons on each MLS telephone. Figure D-2 shows the buttons on the MLS-34D Programming Overlay and the relative location of those buttons on each PARTNER telephone. (The letters on the PARTNER-34D Overlay in Figure D-1 are printed on the Overlay. To help you program from an MLS-34D telephone, you may want to write the letters shown on the MLS-34D Overlay in Figure D-2 on your overlay.)
If you want to program features on specific buttons at target telephones, you should:
1.Look at the figure with the overlay that matches the telephone at your programming extension. 2.Find the location of the button in the picture of the target telephone.
3. Note the letter associated with that particular button. 4.Find the letter in the picture of the Programming Overlay.
5. Press that button on the programming extension.
For example, if you are using a PARTNER-34D telephone at extension 10 and you want to program Do Not Disturb on the top leftmost button of an MLS-18D telephone, refer to Figure D-1, find the top, leftmost button on the MLS-18D telephone, and press the button labeled M on the PARTNER-34D Programming Overlay.For AVAYA, NORSTAR, NEC, SAMSUNG, MITEL, PANASONIC, TOSHIBA telephone systems and voicemail call (866)206-2316 or email MasterTelephone@gmail.com
You can use the illustrations in this appendix to facilitate programming from one telephone type to the other. Figure D-1 shows the buttons on the PARTNER-34D Programming Overlay and the relative location of those buttons on each MLS telephone. Figure D-2 shows the buttons on the MLS-34D Programming Overlay and the relative location of those buttons on each PARTNER telephone. (The letters on the PARTNER-34D Overlay in Figure D-1 are printed on the Overlay. To help you program from an MLS-34D telephone, you may want to write the letters shown on the MLS-34D Overlay in Figure D-2 on your overlay.)
If you want to program features on specific buttons at target telephones, you should:
1.Look at the figure with the overlay that matches the telephone at your programming extension. 2.Find the location of the button in the picture of the target telephone.
3. Note the letter associated with that particular button. 4.Find the letter in the picture of the Programming Overlay.
5. Press that button on the programming extension.
For example, if you are using a PARTNER-34D telephone at extension 10 and you want to program Do Not Disturb on the top leftmost button of an MLS-18D telephone, refer to Figure D-1, find the top, leftmost button on the MLS-18D telephone, and press the button labeled M on the PARTNER-34D Programming Overlay.For AVAYA, NORSTAR, NEC, SAMSUNG, MITEL, PANASONIC, TOSHIBA telephone systems and voicemail call (866)206-2316 or email MasterTelephone@gmail.com
Subscribe to:
Posts (Atom)
Posts
