VRS Fixed Message

VRS Fixed Message 02 General Message Number Input Data 0 = Disable (VRS fixed message will not be played.) 1 = Enable (VRS fixed message will be played.) 0 ~ 100 (0 = No General Message Service) Description Enable (1) or disable (0) the system ability to play the fixed VRS messages (such as You have a message). This item assigns the VRS message number to use for the General Message. Default 0 Related Program 0 03 04 05 06 07 08 VRS No Answer Destination VRS No Answer Time Park and Page Repeat Timer (VRS Msg Resend) Set VRS Message for Private Call Refuse (VRS Msg Private Call) Set VRS Message for Caller ID Refuse (VRS Msg CID) Call Attendant Busy Message 0 ~ 25 (Incoming Ring Group Number) 0 ~ 64800 seconds 0 ~ 64800 seconds 0 = No Message Played 1 ~ 100 = VRS Message 1 ~ 100 101 = VRS Fixed message (Message will only play if PRG 40-10-01 is enabled.) 0 = No Message Played 1 ~ 100 = VRS Message 1 ~ 100 101 = VRS Fixed message (Message will only play if PRG 40-10-01 is enabled.) 0 ~ 100 (0 = No message) This item assigns the transferred Ring Group when the VRS is unanswered after Call Forwarding with Personal Greeting Message. If an extension has Personal Greeting enabled and all VRS ports are busy, a DIL or DISA call to the extension waits this time for a VRS port to become free. If a Park and Page is not picked up during this time, the Paging announcement repeats. This item assigns the VRS Message number to be used as Private Call Refuse. When Fixed message is set, VRS message guidance is: “Your call cannot go through.” This item assigns the VRS Message number to be used as Caller ID Refuse. When Fixed Message is set, VRS message guidance is: “Your call cannot go through.” 0 (No Setting) 0 0 0 0 0