SL1100 NEC

For AVAYA, NORSTAR, NEC, SAMSUNG, MITEL, PANASONIC, TOSHIBA telephone systems and voicemail call (866)206-2316 or email MasterTelephone@gmail.com


  SL1100 IP 24 Button Quick Start Kit. (0 x 8 x 4)  
includes:
(1) 1100010 SL1100 Main KSU (0 x 8 x 4)
(1) 1100111 16-Channel VoIP Daughter Board
(1) 1100112 2-Port InMail CompactFlash
(6) 1100161 IP 24-Button Telephone (Black)
(1) 1100067 Designation Sheets for 24-Button Telephones
   
  SL1100 24 Button Quick Start Kit (4 x 8 x 4)  
includes:
(1) 1100010 SL1100 Main KSU (0 x 8 x 4)
(1) 1100022 4-Port CO Trunk Daughter Board
(1) 1100112 2-Port InMail CompactFlash
(6) 1100063 Digital 24-Button Telephone (Black)
(1) 808920 Installation Cable
(1) 1100067 Designation Sheets for 24-Button Telephones
   
  SL1100 12 Button Quick-Start Kit (4 x 8 x 4)  
includes:
(1) 1100010 SL1100 Main KSU (0 x 8 x 4)
(1) 1100022 4-Port CO Trunk Daughter Board
(1) 1100112 2-Port InMail CompactFlash
(6) 1100061 Digital 12-Button Telephone (Black)
(1) 808920 Installation Cable
(1) 1100066 Designation Sheets for 12-Button Telephones
   
  SL1100 Basic Digital System Kit (4 x 8 x 4)  
includes:
(1) 1100010 SL1100 KSU (0x8x4)
(1) 1100022 4-Port CO Trunk Daughter Board
(3) 1100061 Digital 12-Button Telephone (Black)


SL1100 KSU Equipment
   
  SL1100 Main KSU (0 x 8 x 4)  
Includes the following hardware components:
CPU Board (CPU-B1), 8 Digital x 4 Analog Station Board (084M-B1), Voice Mail
Daughter Board (PZ-VM21) (Voice mail function requires InMail CompactFlash), 
Memory Daughter Board (PZ-ME50), Power Supply & AC Cable (8.5-Ft),
Analog station ring supply & MW lamp driver.
Provides: (3) expansion slots for (1) or (2) Station cards plus (1) PRI Card. 
Also Provides:  Built-in 2-Channel Auto Attendant, (4) Mobile Extension ports, 
(16) Telephony resources  (DTMF/DT/Busy/FSK CID), (128) Tone sender resources 
(System tones/DTMF), (32) Conference channel resources.  
Connectors:  (4) 8-conductor jacks for trunk/station connections,
 8-conductor jack for (2) General Purpose Relays, (3) Audio jacks for MOH/
BGM/External Paging, (1) Ethernet jack, 2-pin connector for external battery backup.  
Power specification for UPS:  128VA (at 120VAC).
   
  SL1100 Expansion KSU Interface Card  
 (1) required if 1100011 Expansion KSU / KSU’s are used.
  Equipped with connectors for Cat5 expansion cables.  Installs in Main KSU.
   
  SL1100 Expansion KSU (0 x 8 x 4)  
Includes the following hardware components:
Expansion Card (EXIFE-C1), 8 Digital x 4 Analog Station Board (084M-B1),
Power Supply & AC Cable,  Analog station ringing supply & MW lamp driver,
Cat 5 cable & ferrite core for connection to Main KSU.
Provides (32) Telephony resources (DTMF/DT/Busy/FSK CID), Card/Daughter Board slots:
“(3) expansion slots for (1) or (2) Station cards plus (1) PRI Card.” 
 (1) Slot for expansion card.  Maximum of (2) per system.
Connectors:  (4) 8-conductor jacks for trunk/station connections,  8-conductor jack for
(2) General Purpose Relays, (3) Audio jacks for MOH/BGM/External Paging,
 2-pin connector for external battery backup.
 Power specification for UPS:  128VA (at 120VAC).
   
  0 External Battery Box – without Batteries  
Provides power during commercial A.C. power failure.  If used (1) required for
Main KSU and  (1) for each Expansion KSU.  Wall or floor mountable. 
 One SL1100 KSU can be installed on top of the battery box.
 Specification for required batteries: (2) 12V 7.0 AH Lead Acid (151 x 65 x 97.5 mm / 2.7 kg)
Recommended model:  GS Yuasa NP7-12.  Estimated backup time :  Approximately (1) hour.

SL1100 Misc Station Equipment
   
  0 NEC Installation Cable  
Open Ended 25 pair with (6) 8-pin Plugs. One recommended per 24 system ports.
   
    Doorchime Box (Doorphone)  
Connects to the last two analog station ports on the 084M board of Main or Expansion KSU.
Maximum (2) per Main/Expansion KSU.  Maximum (6) per system.

SL1100 SIP / VoIP Gateway
   
  16-Channel VoIP Daughter Board  
Provides (16) VoIP channels.   Required for Networking, IP Telephones and SIP Trunks.  
Includes (4) SIP Trunk Ports.  Equipped with 8-conductor jack and ferrite core.
Expandable to (32) VoIP channels with the 16-Channel VoIP Resource License (1100082).
Installs in dedicated slot on CPU-B1 board of main KSU.
   
  Additional 16-Channel VoIP Resource License  
Provides an additional (16) VoIP Channels.  Maximum (32) channels per system.
Note:  VoIP Daughter Board is equipped with (16) channels.
   
  Note: Auto Config Recommendations for the Additional VoIP Resource  
  License are based on the number of configured VoIP resources / devices.  
  The actual application and use of IP Devices and or SIP Trunks   
  may or may not require the additional VoIP Resource License.  
   
  Important Note:  
The VoIP Daughterboard and the additional VoIP Resource License provide a 
maximum of (32) simultaneous talk paths that are shared and used for SIP Trunks,
 Networking Multiple SL1100 Systems, 3rd Party SIP Stations, Desktop Suite 
 Softphone Applications, SL1100 IP Stations and ML440 IP DECT Handsets. 
Please refer to the SL1100 technical documentation for details.

SL1100 InMail
   
  InMail CompactFlash – Small  
Provides:  (2) voice mail ports and approximately (15) hours of storage.
 
  InMail CompactFlash – Large  
 Provides:  (4) voice mail ports and approximately (40) hours of storage.
 
InMail provides automated attendant and voice mail functions. 
Expandable to a maximum of (16) InMail ports with optional 2-port licenses.  
Provides (84) Subscriber Mailboxes, (16) Routing Mailboxes, and (16) Group Mailboxes.
 Installs in the Voice Mail Daughter Board, which is part of the Main KSU. 
AMIS Networking  is not available.  Both InMail CompactFlash units also provide storage
for VMS (Voice Response System) system messages (up to 100),
which can be used as General Messages or a Preamble for the receptionist.
  Maximum duration per message is 2 minutes.
   
  Additional 2-Port InMail License  
Provides an additional 2 ports of InMail.  System maximum of 16 voicemail ports.
System must be equipped with either version of InMail CompactFlash. 
   
  Note: Auto Config Recommendations for additional InMail Ports  
  are based on the number of configured system ports / devices.  
  The actual application and use of the InMail auto attendant and   
  voicemail features may require less or additional voicemail ports.  
 
  Advanced InMail Feature License  
Features:  E-Mail Notification, Cascading message notification,
 Find-Me/Follow-Me, Password Option, Hotel/Motel (related to InMail features)
System must be equipped with either version of InMail CompactFlash.

SL1100 Trunk Interface Cards & SIP Trunk License
   
  0 4-Port CO Trunk Daughter Board  
Provides interface for (4) standard loop-start CO trunks. 
Includes power failure transfer circuit for one line. Equipped with (2) 8-conductor interface 
 jacks: (1) for connection of (4) trunks and (1) for power failure connection for first 
   trunk circuit.  Can only be installed on 084M, 080E, or 008E Cards.  Maximum (1) daughter  
board per 084M, 080E, & 008E card.  Maximum of (3) can be added to each KSU  
(Main & Exp).  Maximum (9) can be added per system.
   
    CO Expansion Mounting Card  
Provides interface for a 4-Port CO Trunk Daughter Board.
 Only required for configurations with fewer station cards than CO Trunk Daughter Boards.
Installs in expansion slots 1 or 2 in Main KSU or Expansion KSU.
   
    T1/PRI Interface Card  
Provides interface for (1) T1/PRI circuit.
Equipped with (1) 8-conductor RJ-45 interface jack.  With R1.5, installs in expansion
slot 1, 2, or 3 in Main KSU or Expansion KSU.  With R1, installs in expansion slot 1 or 2.
Maximum (1) per Main or Expansion KSU.  Maximum (2) per system.
   
  SIP CO Trunks  
Enter the number of required SIP Trunks.  Additional 2-Port SIP
CO License required for each (2) SIP trunks after the first (4),
which are included on the VOIP Daughter Board (1100111).
Maximum of (32) SIP Trunks.  Requires system software 2.0 or higher.

SL1100 Station Interface Cards & Associated Licenses
   
  8-Port Digital Station Card  
Provides interface for (8) digital stations.
Equipped with (2) 8-conductor interface jacks.  Installs in expansion slot 1 or 2 in Main
KSU or Expansion KSU.  Allows addition of (1) 4Pt CO Trunk Daughter Board (4COIDB).
Maximum (2) per Main KSU and (2) per Expansion KSU. 
   
  8-Port Analog Station Card  
Provides interface for (8) analog stations.
Equipped with (2) 8-conductor interface jacks.   Installs in expansion slot 1 or 2 in Main
KSU or Expansion KSU.  Allows addition of (1) 4 Port CO Trunk Daughter Board (4COIDB).  
Maximum (2) per Main KSU and (2) per Expansion KSU.
   
  1-Port 3rd-Party SIP Station License  
Required for each 3rd-Party SIP telephone.
 Not required for SL1100 telephones or ML440 handsets.  Requires VOIP Daughter Board
(1100111) and appropriate quantity of VoIP Channels for the system configuration.
Maximum (64) SIP Stations allowed per system.
   
  Encryption License  
Provides encryption for all NEC multi-line IP Terminals. 
Compatible w/NEC SL1100 IP terminals only-not 3rd party SIP.
 One per system (system-wide license)
   
  Additional 1-Port Mobile Extension License  
Allows a predetermined external telephone (typically a cell phone) to link to the SL1100
and operate as an internal single-line telephone.  This license is required for each Mobile
Extension after the first (4), which are included on the CPU.  Each Mobile Extentsion takes
up an analog SLT port in the system, although it does not require an analog station card.
Mobile Extension is recommended only with a T1/PRI application in most scenarios.
   

Other SL1100 Licenses
   
  ACD License  
Provides Automatic Call Distribution Features. 
Capacity per system: (2) ACD groups with(16) ACD agents each. 
Supervisor function is not provided.  Requires InMail CompactFlash (1100112 or 1100113)
and InMail Advanced Feature License (1100084), for ACD delay announcements.
   
  SLNet License  
Provides VoIP networking capability for up to (5) sites.
Features include:  Centralized Network Attendant, Centralized or local voice mail system,
 Intercom between all sites, Share trunks between all sites, BLF and Centralized Park Orbits
across network.  Maximum network ports is 168.  Maximum network channels is 32.
One SLNet License is required for each site in the network.  Each system in the 
network must be equipped with VoIP Daughter Board (1100111).
For (32) VoIP channels, the 16-Channel VoIP License (1100082) is also required. 
   
  Hotel/Motel License  
 Provides Hotel/Motel features, such as:  Wake Up Call, Single Digit Dialing Menu,
Message Waiting, Room-to-Room Calling Restriction, Toll Restriction (When checked in),
Room Status (set and monitor), Room Status Reports.  If system is equipped with
InMail Advanced InMail Feature License (1100084) may also be required. 
Maximum (1) Hotel/Motel License per system.
   
  1-Client Desktop Suite License  
When used as a 'stand-alone' Softphone – Requires IP Resource.
   
  1-Client Desktop Suite License  
When used inconjunction with a SL1100 Digital or VoIP station.
   
Provides one user with “Desktop” and “Softphone” features. 
Desktop allows user to:  Control their telephone from their PC, Review/manage log of
incoming/outgoing calls, Initiate calls from MS Outlook Contacts folder, View screen-pops.
Softphone allows use of PC or laptop as a key telephone.
Depending on setup functions, may utilize a system port.
                         
                         
  SL1100 Telephones  
   
  Digital 12-Button Telephone (Black)  
  Digital 12-Button Telephone (White)  
Equipped with:  (12) User Programmable Function Keys,
   
  Digital 24-Button Telephone (Black)  
  Digital 24-Button Telephone (White)  
Equipped with:  (24) User Programmable Function Keys,
 
Digital Stations Provide:  Full-duplex Hands-free, Backlit 3-line/24-character display,
Backlit Dialpad, User Programmable Function Keys with Red/Green LED’s, (4) Soft Keys,
(9) Fixed Feature Keys, Navigator Key, 2-Step Leg Angle Adjustment,
Headset Jack, 9-Ft handset cord, 6-Ft line cord & wall-mounting hardware.
   
  Digital 60-Button DSS Console (Black)  
  Digital 60-Button DSS Console (White)  
Provides one-button access to extensions, trunks, and system features.
 
DSS Consoles equipped with 2-Step leg angle adjustment and wall-mounting hardware.
 Uses a digital station port.  Maximum of (4) DSS Consoles per extension.
Maximum of (12) DSS Consoles per system.
   
  IP 24-Button Telephone (Black)  
  IP 24-Button Telephone (White)  
Equipped with:  (24) User Programmable Function Keys,
 
IP Stations Provide:  Full-duplex Hands-free, Backlit 3-line/24-character display,
Backlit Dialpad, User Programmable Function Keys with Red/Green LED’s, (4) Soft Keys,
(9) Fixed Feature Keys, Navigator Key, 2-Step Leg Angle Adjustment,
Headset Jack, 9-Ft handset cord, 6-Ft line cord & wall-mounting hardware.
Does NOT require a SIP Station License.  Equipped with (2) RJ45 jacks for LAN and
PC connections.  Requires power by optional AC Adapter (780135) or PoE 802.3af.
IP telephones are NOT equipped with a line cord – requires dealer-provided Cat5 cord.
 Wall-mounting requires the optional kit (1100162).
   
  Wall-Mount Unit for 24-Button IP Telephones  
Not required for digital telephones.
 
  AC Adapter for 24-Button IP Telephone  
Input:  60Hz  120V, Output: 27VDC  1.0A.
 Not required if IP telephone is connected to PoE Dataswitch.
 
    Wireless Headset Adapter (WHA)  
Provides seamless interface for Plantronics wireless Headsets that currently
support the Plantronics HL10 Handset Lifter.  When using a WHA, the HL10
Handset Lifter is not required.  Compatible with all SL1100 telephones. 
Installs in adapter slot on the bottom of the SL1100 telephone.
 
    NEC 1-Port Call Logging Unit   
Provides ability to record, store and manage conversations of (1) SL1100 digital terminal.
Equipped with (1) USB connector, (1) station input jack and (1) station output jack.
Includes: 6ft. USB Cable, 4ft Terminal Line Cord, Software CD.  Connects to PC via USB.
Connects to digital terminal via station jack.  One required per digital terminal.
Recorded file is saved to local PC and/or network server.
Requires (1) Gigabit of storage for (35) hours at the highest quality level or (168) hours
at the standard quality level.  Dimensions : 3 ¼” W x 2 ¾” D x 1” H
                         
                         
SL1100 Designation (DESI) Sheets 
   
  Designation Sheets for 12-Button Telephone (25 PKG)  
  Designation Sheets for 24-Button Telephones (25 PKG)  
  Designation Sheets for 60-Button DSS Console (25 PKG)  
(To print DESI labels, use DESI Software available on the SL1100 Website)
                         
                         
SL1100 Integrated Cordless Digital Telephones
   
  Digital Cordless DECT Telephone (Model DTL-8R-1)  
Used as a 'stand-alone' device - Requires Digital Port.
   
  Digital Cordless DECT Telephone (Model DTL-8R-1)  
Used inconjunction with a digital station - Does Not Requires Digital Port.
   
 Integrated to SL1100 system.  1.9GHz DECT 6.0 technology.
Includes:  Base Unit with AC Adapter (10VDC 500mA) and wall-mount plate/desk stand,
Cordless Handset with Belt Clip, Charging Cradle with AC Adapter (9VDC 350mA) and
wall-mount hardware, Nickel Metal Hydride battery (2.4VDC-910 mAh) - 16-Hr talk time
7-day standby, User Guide.  Charging cradle equipped with slot to charge spare battery.
Handset contains:  Display & Dialpad, (7) Fixed feature keys, (8) Programmable
Function Keys, Speakerphone (hands-free) feature.  Connects to digital station port.
   
  BT-1009 Spare/Replacement Battery  
Nickel Metal Hydride / 2.4VDC 910mAh (Recommended)
   
  Cordless DECT Repeater (Model DTL-RPT-2)  
Extends the range of the 730095 Cordless DECT Telephone.
Supplied with AC Adapter.  (5VDC/500mA) with 6Ft. cord.  Repeater must be placed
within range of the DECT base or another repeater.  Max (6) repeaters per base unit,
- (3) in opposite directions.  Does not require Repeater Programming Kit.
   
SL1100 Integrated Cordless IP Telephones
   
  SL1100 / ML440 Starter Kit  
 Consists of:  (1) 730651 AP20 Access Point,
(3) 730650 ML440 Handsets, and (1) 1100111 SL1100 VoIP Daughter Board.
   
  SMB Wireless ML440 Package  
Consists of (1) 730651 AP20 Access Point and (3) 730650  ML440 Handsets. 
   
  AP20 IP DECT Access Point  
Omni-directional 1.9GHz access point for ML440 DECT Handsets.
Connects directly to LAN via a Level 2 PoE switch port.  
Includes desk/shelf base & wall-mounting hardware.  Can be ceiling-mounted
with optional hardware (730658).  Simultaneous conversations allowed per AP20: (10)
if only (1) AP20 is installed or (8) per access point if multiple AP20’s are installed.
Maximum of (20) AP20 Access Points allowed per system.  Maximum of (30) ML440 hand-
sets can be registered to a AP20.  System must be equipped with VoIP Daughter Board.
   
  ML440 IP DECT Handset  
Consists of:  ML440 Handset, CE-MB206-5C-02 Li-ion Battery Pack - 3.7V  1100mAh, Belt
Clip, Charger Unit with slot to charge spare battery.  Includes wall-mounting hardware,
Charger Unit with slot to charge spare battery.  Includes wall-mounting hardware, AC
Adapter for Charger Unit, Designation strips for extension # & programmable keys.
Features:  Dialpad, Speakerphone, Illuminated Color LCD Display, Navigator Key, Volume
& Mute keys,  (4) Fixed feature keys, (3) Soft Keys, (4) Programmable Function Keys,
Headset Jack (2.5mm).  Requires AP20 IP DECT Access Point (730651). 
Does not require an SL1100 SIP Terminal License.  System must be equipped with
VoIP Daughter Board.  Maximum (64) ML440 handsets allowed per
 system, but usage is limited by available VoIP resources.
   
  Ceiling-Mount Bracket for AP20 Access Point  
   
  Spare/Replacement Battery Pack  
Lithium-ion 3.7V 1100mAh
   
  Leather Case for ML440 Handset  
                         
                         
SL1100 Communication Analyst Licenses
   
  Communication Analyst 20-Station License  
Provides call accounting features for 20 Stations. 
   
  Communication Analyst Full System License  
Provides call accounting features for all stations in a system.
   
  Communication Analyst 5-Client Network License  
Provides concurrent user access for (5) additional PCs on the customer’s LAN.
Must be used in conjunction with the CA 20-Station License 
(1101109) or the CA Full System License (1101110).
   
  Communication Analyst 5-Client Web Reporting License  
Allows Internet browser access for (5) designated users.
Must be used in conjunction with the CA 20-Station License 
(1101109) or the CA Full System License (1101110).
   
  Communication Analyst Remote Site License  
(1) Required for each monitored remote site.  This license is installed on the main site CPU.
Must be used in conjunction with the CA 20-Station License 
(1101109) or the CA Full System License (1101110).
   
  Communication Analyst Remote Site Software  
Optional for Remote Sites.  Software to be installed on a PC at the remote site.
This PC will connect via network to the Communications Analyst server at the main location.
This software provides two functions:  Buffers local SMDR data during network downtime
and connects to a telephone system  that only provides a serial SMDR connection.
 This software is not required unless either or both of the above functions are required.
   
  Communication Analyst Traffic Analysis License  
Enables understanding of trunk utilization.
Must be used in conjunction with the CA 20-Station License 
(1101109) or the CA Full System License (1101110).
   
  Communication Analyst PMS Integration License  
Provides interface to property management systems for guest billing services.
Must be used in conjunction with the CA 20-Station License 
(1101109) or the CA Full System License (1101110).
 
Note: Communications Analyst requires SL1100 Release 2 system software or higher.
Refer to “SL1100 Licensing” notes on the General Information page.
                   
Call (866) 206-2316