CO/IP AUTO FAULT DETECTION AND RECOVERY
Description
If a CO line fault is reported from a PRI/VoIP/SIP gateway, the iPECS places the CO Line in an Out-Of-Service state and places it in the Unused CO/IP Group. Upon receiving the CO Line recovery report, the CO Line is automatically restored. The fault is also reported to the iPECS NMS when configured.
Operation System Operation of Fault Detection and Recovery is automatic.
Conditions
1. The “Unused” CO Group contains CO line numbers that are not used or are temporally blocked.
Programming
CO/IP 1. CO Line Group (PGM 141-Btn 1)
Related Features CO/IP Line Groups
CO/IP AUTO FAULT DETECTION AND RECOVERY
Posts
