PULSE SIGNALING
Description
An analog CO line will send dial pulse signals to the central office. If programmed as a pulse CO line, the system will send open loop pulses at 10 pps with the assigned break/make ratio.
Operation System Operation of this feature is automatic when programmed.
Conditions
1. The break/make ratio is system programmable as 60/40 or 66/33.
Programming
CO/IP 1. CO Line Signal Type (PGM 141-Btn 5)
SYSTEM 1. Pulse Dial Ratio (PGM 176)
Related Features
2. Pause Time
PULSE SIGNALING
Posts
