Installation of the Boards
Prior to installing the Boards, the following should be considered:
 Power must be turned OFF.
 To protect the System from static electricity, do not touch the boards. To discharge static, touch a
grounded object, and wear a grounding strap.
 Insert boards carefully to avoid bending connector pins (male pins on MBU/EMBU) and board damage from power shortage caused by misaligning connectors.
To install the Board, perform the following Steps:
1. Before inserting the Board, remove the cover plate of slot as shown in #1 of Figure 4.1.
2. Holding the board as shown in #2 of the diagram, carefully insert the Board in the direction of the arrow and assure that the Board securely engages with the connector on the MBU (#3).