DEFAULTING THE SYSTEM
You can no longer default the system by turning the MP40 battery backup switch OFF then ON again. Turning the battery backup switch OF then ON again will simply clear the SRAM which contains the data mentioned above. You can default the OS7400 in the following ways:
1) MMC 811 MEMORY CLEAR (however mmc 830 IP address information will be retained).
2) Leave the MP40 battery backup switch in the OFF position and boot the system. This is a FULL default. You will have to power down and turn the battery back up switch back ON and reboot.
3) When the Country Selection is changed by MMC 812 or the MP40 DIP SWITCHES
Defaulting the system
Posts
