Remote system access
The remote access feature allows callers elsewhere on the private or the public network to access a Norstar system by dialing directly into the system without going through an attendant. Once in the system, the remote user can use some of the system resources. The remote access must be enabled in programming before callers can use it.
Norstar systems support remote system access on the following trunk types, which may require the remote caller to enter a COS password for direct inward system access (DISA):
• auto-answer loop start trunks
• auto-answer E&M trunks
• DID trunks, by means of the DISA DN
• PRI trunks, by means of the DISA DN
Remote system access
Posts
