Mirroring operation

Mirroring operation On system  power-up  —  e.g.,  at  initial  installation or  whenever  a  drive  is  replaced  —  the  M3  will  first  verify  that each  drive is  an  ESI-formatted  drive.  If  so,  it  then  will  transfer  all  data  from  the primary  drive to  the mirroring drive.  This  process  can take  anywhere from  a few minutes to  one  hour,  depending  on  system  activity,  amount of  voice message  storage,  and  configuration.  System  operation  won’t  be affected during  the  data  transfer, because  this  transfer  will  occur only  when  call-processing  is  making  no  disk  drive  access  requests. If a  primary  drive  is  replaced, data  will be  copied  in  the  same  fashion  from  the  mirror  drive  to  the  new  primary drive.  Again,  the replacement  drive must  be  a new,  unprogrammed ESI  drive.  If it’s  not, the  system  may copy  all  data in  the wrong  direction  —  i.e.,  from  the  new (mostly empty)  primary  drive to  the mirror  drive! Therefore,  ESI  recommends that  the  mirror  drive be  moved  to  the  primary  drive  mounting position and  the new drive be  mounted on  the  mirror  drive mounting position.