Feature Access Codes NEC Elit
SECTION 1GENERAL INFORMATION
The table in this chapter shows the Access Codes used in the system. Some codes are set as system defaults. Others have no default, but are programmable.
Table notes include the following:
Access Codes operate on telephones specified during installation.
N All other notes are self explanatory
Function Operation Notes Microphone ON/OFF A © Dial A System Name Confirmation A © Dial C Verify Station Number A © Dial D Confirm Timed Alarm A © Dial EA © A Reset Timed Alarm System A © Dial EH © A Installation Reset Timed Alarm A © Dial EI © A Set Do Not Disturb A © Dial FK © A Set Call Forward – All Calls A © Dial FK © Dial XXX © A XXX = Station number where call is to be forwarded. Set Automatic Trunk- to-Trunk Transfer Mode A © Dial FA © Dial XX © A XX = Incoming Trunk Port Number (01~64) 00 = All Trunks Installation Cancel Automatic Trunk-to-Trunk Transfer to Outside Mode A © Dial FB © Dial XX © A XX = Incoming Trunk Port Number (01~64) 00 = All Trunks Installation
For AVAYA, NORSTAR, NEC, SAMSUNG, MITEL, PANASONIC, TOSHIBA telephone systems and voicemail call (866)206-2316 or email MasterTelephone@gmail.com
Call (866) 206-2316 Master Communications, Inc