ATM card is used to add a combination of ports to an IP500v2 control unit. Not supported by IP500 control units. · Supports

· 6 Digital Station ports.
· 2 Analog Extension ports. · 4 Analog Trunk ports.
· 10 voice compression channels. · IP500 Control Unit:
· IP500v2 Control Unit:
· Maximum per Control Unit: 2 combination cards of any type per IP500v2 control unit.
· IP500 Trunk Card Support: 1. The trunk daughter card is pre- installed and cannot be replaced with another card type.
Port Type Ports Features
Digit Station 1 to 6 Provides DS ports for digital stations (except 4100, 4400, 7400, M and T-Series). 198 30
LEDs
· Green On = Phone detected.
· LED1 is also used for base card status: · Red On = Error
· Red Slow Flash = Initializing.
· Red Flash every 5 seconds = Card okay. · Red Fast Flash = System shutdown.
Analog
Extension 7 to 8 · Supports ICLID modes DTMFA, DTMFC, DTMFD, FSK and UK20.
· REN 2 (1 for external bell device). · Off-Hook current: 25mA · Ring Voltage: 40V.
· Intended for connection to two-wire analog phones, the ports do not include a ringing capacitor. For connection to 4-wire analog phones, connection should be via a master socket with ringing capacitors.
· During power failure extension port 8 is connected to the analog trunk port 12. · No status LEDs are used for analog phone extensions.
Analog Trunk 9 to 12 · DTMF, ICLID, Busy tone detection.
· Over-voltage and lightning protection. · DTMF and LD dialing.
· Adjustable echo cancellation (default 16ms). Selectable to Off, 8, 16, 32, 64 and 128 milliseconds.
LEDs
· Green on = Card fitted.
· Green flashing = Trunk in use.
· LED 9 is also used for daughter card status. · Red On = Error
· Red Slow Flash = Initializing.
· Red Flash every 5 seconds = Card okay. · Red Fast Flash = System shutdown.
Name Description SAP Code IPO IP500v2 COMBINATION
CARD ATM IPO IP500v2 COMBINATION CARD ATM 700476For AVAYA, NORSTAR, NEC, SAMSUNG, MITEL, PANASONIC, TOSHIBA telephone systems and voicemail call (866)206-2316 or email MasterTelephone@gmail.com