Reset-type Buttons for Samsung 7400
The UC-7400 computers have two reset-type buttons. The button labeled Reset has the same effect as switching off the power and then switching the power back on. The button labeled Reset to default returns the UC-7400 to its factory default configuration.
Reset Button
Pressing the Reset button initiates a hardware reboot. The button plays the same role as a desktop PC’s reset button.
In normal use, you should NOT use the Reset Button. You should only use this function if the software is not working properly. To reset an embedded Linux system, always use the software reboot command />reboot to protect the integrity of the data being transmitted or processed.
Reset to Default Button
Press the Reset to default button continuously for at least 5 seconds to load the factory default configuration. After the factory default configuration has been loaded, the system will reboot automatically. The Ready LED will blink on and off for the first 5 seconds, and then maintain a steady glow once the system has rebooted.
We recommend that you only use this function if the software is not working properly and you want to load factory default settings. To reset an embedded Linux system, always use the software reboot command />reboot to protect the integrity of data being transmitted or processed. The Reset to default button is not designed to hard reboot the UC-7400.
For AVAYA, NORSTAR, NEC, SAMSUNG, MITEL, PANASONIC, TOSHIBA telephone systems and voicemail call (866)206-2316 or email MasterTelephone@gmail.com