Telephone Systems Installers New York NY NYC Phone systems installations Brooklyn,Queens,Bronx,VoIP

Toshiba Strata DK Telephone System

Changing the time on a Strata DK system must be done from the "main" or primary phone. It is usually extension # 10, or # 200.
1.-
With the phone on-hook, dial intercom, #, 652 (depending on the system type, the # may or may not apply)
2.-
Enter the correct time using HH/MM/SS, like 07:24:00
3.-
Press redial




TOSHIBA 16 Leave the handset on hook, press intercom 6 5 2, then enter the time of a 24 hour clock, entering 2 digits for the hour, 2 digits for the minutes, and 2 digits for the seconds ? enter a leading 0 for any single digit entered, press Redial, press Speaker. This must be done at extension 10 ? usually the receptionist phone. For example, if the time is 2:15 P.M., press intercom 6 5 2, 1 4 1 5 0 0, Redial Speaker. . TOSHIBA 16E / 40 Leave the handset on hook, press intercom # 6 5 2, then enter the time of a 24 hour clock, entering 2 digits for the hour, 2 digits for the minutes, and 2 digits for the seconds ? enter a leading 0 for any single digit entered, press Redial, press Speaker. This must be done at extension 10 ? usually the receptionist phone. For example, if the time is 2:15 P.M., press intercom # 6 5 2, 1 4 1 5 0 0, Redial Speaker. TOSHIBA 280 / 424 Leave the handset on hook, press intercom # 6 5 2, then enter the time of a 24 hour clock, entering 2 digits for the hour, 2 digits for the minutes, and 2 digits for the seconds ? enter a leading 0 for any single digit entered, press Redial, press Speaker.This must be done at extension 200 ? usually the receptionist phone. For example, if the time is 2:15 P.M., press intercom # 6 5 2, 1 4 1 5 0 0, Redial Speaker. TOSHIBA CTX 100Do Not Pick Up Handset (Must be done at display phone)- Press Hold Button * # * # 1 * 2 * 3 *- Display says Password =- Enter 0 0 0 0 - Press HOLD Button - Display says Prog =- Enter 9 0 2- Press HOLD- Display says Select Param
To change Date:- Press Intercom Button- Enter Date: YY MM DD (YY=02, MM=10, DD=28) - Press HOLD Button- Press HOLD- Lift Handset and return to cradleTo change Time:- Press Line 1 button (button directly above intercom button)- Enter Time: HH MM SS (HH=22 MM=03 SS=00) - military time must be used- Press HOLD- Press HOLD- Lift handset and return to cradle
Toshiba DK280
Date


From receptionist station, without lifting the handset, press "Intercom"
Dial "#651"
Dial the time in YY:MM:DD format.
Press "Redial" or "#".
Press speaker.
Time


From receptionist station, without lifting the handset, press "Intercom"
Dial "#652"
Dial the time in military format HH:MM:SS.
Press "Redial" or "#".
Press speaker.
Day of the Week

From receptionist station, without lifting the handset, press "Intercom"
Dial "#653"
Dial the day of the week (1-7).
Press "Redial" or "#".
Press speaker.
Toshiba Perception System - from attendant station
Follow all steps even if you wish to change only the time on your system.
Display Date:

Press the "DIS TOD" key.
The date is now displayed as follows:SRC cos DESTMonth Day Year
Set Date:
Enter the date on the dial pad in MMDDYY format. The new date is displayed.
Display Time:

Press the "DIS TOD" key again.
The time is now displayed as follows:SRC cos DESTHours Minutes Seconds
Set Time:
Enter the time in military time HHMMSS format (for example, 090105 for 9:01 am and 5 seconds and 210105 for 9:01pm and 5 seconds). The new time is displayed.
To Start the Clock and Clear Display:
Press the "DIS TOD" key a third time.