IP Office 500v2
IP Office is a modular communications solution that scales from 2 to 384 extensions. It provides a hybrid PBX with both Time Division Multiplexing (TDM) and IP phone support that can be used in either mode or both concurrently. IP Office has data capabilities built in, providing IP routing, switching and firewall protection between LAN and WAN. IP Office has an integrated software applications suite that delivers a contact centre, voice and email messaging, Interactive Voice Response, conferencing and computer telephony integration.
IP Office solutions are built from hardware units and application software. Hardware provides the connectivity for voice and data circuits and processor units for the solution software. Each IP Office solution will require a system control unit, trunk connections to service providers, and expansion modules for TDM phone cabling. IP Phones connect over LAN connections to the IP Office solution and require a voice compression resource.
Ideal for up to 384 users
• A wide range of phones are supported (analogue, digital, IP and SIP)
• Support for up to 12 expansion modules
• Support for up to 240 lines
• Up to 148 voice compression channels
• Up to 40 channels of voicemail (IP Office Preferred Edition required)
• Multi-site networking up to 1000 users across 32 systems
Dimensions (HxWxD): 7.3cm (2.9in) x 44.5cm (17.5in) x 36.5cm (14.4in). Weight: 3.2kg (7lb)
Part Code: BND5000v2
(IP500v2 Base Unit + SD Card + Power Lead)
IP500v2 Combination Cards
The IP500v2 system supports two variants of Combination Card. These Combination Cards provide a mix of digital phone, analogue phone and trunk connections as well as voice compression modules in a single base card. The Combination Card is available in two options; ATM4 or BRI4. The Combination Card does not support additional daughter cards and a maximum of two Combination Cards are supported on an IP500v2 system.
Combination Card ATM4 Combination Card BRI4 Part Code 700476013 700476021 Includes 6 x digital phone ports 2 x analogue phone ports 4 x analogue trunks 10 x VCM channels 6 x digital phone ports 2 x analogue phone ports 2 x BRI (4 channels) 10 x VCM channels
IP500v2 SD Card
The SD Card is an integeral component of every IP500v2 system and is required to enable system software, configuration details and aum ofum of two Combination Cards are supported on an IP500v2 system.
Combination Card ATM4 Combination Card BRI4 Part Code 700476013 700476021 Includes 6 x digital phone ports 2 x analogue phone ports 4 x analogue trunks 10 x VCM channels 6 x digital phone ports 2 x analogue phone ports 2 x BRI (4 channels) 10 x VCM channels
IP500v2 SD Card
The SD Card is an integeral component of every IP500v2 system and is required to enable system software, configuration details and activate license keys. The SD Card also provides a cost effective messaging solution with 2 ports enabled by default and scalable to 6 ports via license key activation.
The SD Card provides the following functions:
- System software
- System configuration
- License key activation
- System Status Application
Part Code: 700479702
- Essesntial Edition (2 port embedded voicemail that can be scaled to 6 ports)
An optional SD Card can also be used to provide backup to the primary SD Card to ensure business continuity.
An optional SD Card can also be used to provide backup to the primary SD Card to ensure business continuity.
The optinal card can be a standard ‘off the shelf’ class 4 SD card.
For AVAYA, NORSTAR, NEC, SAMSUNG, MITEL, PANASONIC, TOSHIBA telephone systems and voicemail call (866)206-2316 or email MasterTelephone@gmail.com