EMERGENCY CALL E-911 (CALLER LOCATION) SUPPORT Description The Emergency Call E-911 (caller location) Support feature integrates the iPECS to a PBX ANI Link unit, such as from Tone Commander, to provide caller id and location information to an emergency center. When an emergency call is placed from a station of the iPECS, an assigned emergency CO Line is used to connect the ANI link unit. The iPECS sends the station number, four (4) digits, to the unit as DTMF digits. The ANI Link unit places a call to the emergency center over a connected CAMA trunk. Caller Id and location information from the ANI Link unit database is sent to the emergency center in the proper format and the station is connected to the call. This feature also provides a means to identify a Power Failure signal from the ANI Link unit. Typically, an ANI Link unit will incorporate a normally open contact that closes when power to the unit fails. If a Power Failure signal is detected, iPECS routes emergency calls via PSTN/ISDN circuits other than those marked for emergency call use until the Power Fail signal is removed. Operation Operation of this feature is automatic when assigned

EMERGENCY CALL E-911 (CALLER LOCATION) SUPPORT
Description
The Emergency Call E-911 (caller location) Support feature integrates the iPECS to a PBX ANI Link unit, such as from Tone Commander, to provide caller id and location information to an emergency center. When an emergency call is placed from a station of the iPECS, an assigned emergency CO Line is used to connect the ANI link unit. The iPECS sends the station number, four (4) digits, to the unit as DTMF digits. The ANI Link unit places a call to the emergency center over a connected CAMA trunk. Caller Id and location information from the ANI Link unit database is sent to the emergency center in the proper format and the station is connected to the call.
This feature also provides a means to identify a Power Failure signal from the ANI Link unit. Typically, an ANI Link unit will incorporate a normally open contact that closes when power to the unit fails. If a Power Failure signal is detected, iPECS routes emergency calls via PSTN/ISDN circuits other than those marked for emergency call use until the Power Fail signal is removed.
Operation
Operation of this feature is automatic when assigned