Programming Connections for the 1600 DSL Module 2

Programming Connections for the 1600 DSL Module 2
The programming of the 1600 DSL module is separate from the programming of the PARTNER ACS. You can program the 1600 DSL module either locally or remotely.
To locally program the module, connect a cable from a PC’s serial port to the Console port on the module.
You can set up the module for remote programming by following these steps (see Figure ):
1. Connect a cable from an extension port on the system to the Line jack on an external modem. The modem should have the following parameters:
■ 14.4 kbps or greater
■ Auto-Answer is enabled ■ DTR override is enabled ■ Echo commands are Suppressed ■ Result and Error codes are Suppressed
2. Connect a cable from the serial port on the modem to a null modem.
3. Connect a cable from the null modem to the Console port on the 1600 DSL module.