Performing Startup

Performing Startup
1. Enter the Startup access code from a programming set, by pressing ≤••ÍÊÅÂÊË∏ which is the same as ≤••‡°¤‡°°‡.
To be accepted, the Startup code must be entered no later than 15 minutes after the Norstar system has been powered up.
If 15 minutes have elapsed since you powered up the system, turn system power off and on and wait for the system to power up again.
2. Enter the Installer password.
The default is Ç؈ÏÈÌ which is the same as ¤flfl‹››.