Automatic System Answer Button

Automatic System Answer Button
Use this feature to program a button to turn Automatic System Answer (ASA) on and off. This feature helps the operator answer calls during busy periods.
Considerations 7
■ This feature is available only on the system telephone at extension 10.
■ Program an Automatic System Answer Button on a button with lights on the system display telephone at extension 10. (This feature is not supported on a button without lights.)
■ The Automatic System Answer Button returns to the status (on/off) it was in before a power failure occurred or System Reset was used

Door phone

Communication - In Noisier Locations

E-30-PT/E-30-PT-EWP Brushed 316 Stainless Steel (shown in optional VE-5x5)
The E-30-PT is designed to provide quick and reliable communication in noisier areas. The mic sensitivity is set to a low level until the TALK button is pressed then it is raised to a normal level. In this way, the E- 30-PT assures that the called party’s voice will be broadcast over the speaker. In applications where the background noise can be loud- er than the person calling, a handset type phone is recommended.
The E-30-PT features non-volatile memory, a built in dialer, and intelli- gent call progress detection for automatic hang-up when the call is completed. The E-30-PT can be programmed to dial up to 5 different numbers on ring no answer or busy and can be configured to dial these numbers until answered.
The E-30-PT-EWP shares all of the features of the E-30-PT in addition to Enhanced Weather Protection (EWP) for outdoor installations where the unit is exposed to precipita- tion or condensation. EWP products feature foam rubber gaskets and boots, silicon sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards with internally sealed, field-adjustable trim pots and DIP switches for easy on-site programming.
FFeeaattuurreess
AApppplliiccaattiioonnss
Non-ADA Hot-Line Phones for:
• Terminals• Stadiums
• Parking lots/ramps• Convention centers
• ATM machines
Gate and Door Entry Phones for:
• Business lobbies
• Vehicular and pedestrian gates
• Residences
CAUTION - When installing on an analog extension of a phone system: Some phone systems do not conform to analog telecom standards and might not be compatible with the E-30-PT phones. For a detailed description of the telephone line specifications required for any of the E-30-PT phones, see DOD# 869.
SSppeecciiffiiccaattiioonnss
Power: Telephone line powered. Minimum 24V DC talk battery voltage, with a minimum loop current of 20mA loop (room temp), or 25mA (extended cold temp range). Loop current may be boosted on low current lines with a Viking Model TBB-1B talk battery booster (DOD# 632). Minimum Ring Voltage: 90VAC RMS Dimensions: Overall-127mm x 127mm x 57mm (5” x 5” x 2.25”), Plastic Electrical Box-102mm x 102mm x 54mm (4” x 4” x 2.12”) Shipping Weight: 1 Kg (2.2 lbs)
Operating Temperature: -26°C to 54°C (-15°F to 130°F) Humidity - E-30-PT: 5% to 95% non-condensing Humidity - E-30-PT-EWP: Up to 100% condensing Connections - E-30-PT: RJ11 jack
Connections - E-30-PT-EWP: Gel-filled butt connectors
• Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics, speaker/ mic screen, heavy duty metal keypad and “CALL” button and hex drive mounting screws
• Weather Resistant Features: Marine grade 316 stainless steel faceplate, screws and and push button switch. Switch internally sealed per IP67. Mylar speaker. Self-draining mic mount. Faceplate, mic and speaker gaskets. Weather resistant powder paint on optional VE-5x5 (DOD# 424).
• E-30-PT-EWP is designed to meet IP66 Ingress Protection Rating (see DOD# 859 for more information)
• Push to talk button
• Telephone line powered
• Non-volatile E2 memory (no batteries required)
• Programmable to dial up to 5 numbers on busy or ring no answer
• Red off-hook LED indicator
• Volume adjustments for microphone and speaker
• Advanced call progress detection: disconnects on busy signal, return to dial tone, CPC, reorder tone, maximum call time out and programmable silence time out
• Selectable auto-answer feature for monitoring
• Selectable push button disconnect
• Extended temperature range (-15°F to 130°F)
• Flush mountable using included plastic rough-in box
• Optional VE-5x5 surface mount back box (DOD# 4

Door entry Telephone

Add a Viking Entry Phone to an
Existing Phone Line
The C-200 allows single line telephones or a telephone system to share a phone line with a single Viking entry phone. Tenants may answer an entry phone call and converse with the visitor.
The C-200 provides a “Call Waiting” tone when the phone line is in use.
Tenants may call out to the entry phone for mon- itoring purposes. Auxiliary contacts are provided to operate a doorbell, or activate a camera, lights, etc.

If additional features (such as doorstrike, multiple entry phones with caller ID, and key- less entry) are needed, use the Viking model C-200

AUTOMATIC PRIVACY

AUTOMATIC PRIVACY
Description
Privacy is insured on all communications in the system. If desired, the customer may elect to disable the Automatic Privacy feature, allowing another station to join in an existing external conversation uninvited. In such a case, a conference is established.
Operation iPECS Phone To intrude into a call when Privacy is disabled
1. Press a busy (lit steady) individual {CO}/{IP} access button, user connected to the call with existing internal station user.
Conditions
1. With Automatic Privacy disabled, privacy is still assured on all intercom and conference calls.
2. To override privacy, Privacy must be disabled and the intruding station must have Override enabled as well as a direct appearance for the desired {CO}/{IP} line.
3. Only one station can intrude on an active call.
4. An intrusion tone can be provided to the call indicating another station has accessed the line.
5. If either internal party presses another {CO}/{IP}, a {DSS}, {PAGE}, [CONF] or other conflicting button, the party is removed from the “Conference” and must press the {CO}/{IP} button again to reenter the conversation.

Barge-in

Barge-In
Description
Barge-In permits an extension user to break into another extension user’s established call, including Conference calls. This sets up a Conference-type conversation between the intruding extension and the parties on the initial call. With Barge-In, an extension user can get a message through to a busy co-worker right away.
There are two Barge-In modes: Monitor Mode (Silent Monitor) and Speech Mode. With Monitor Mode, B the caller barging in can listen to another user’s conversation but cannot participate. With Speech Mode, the caller barging in can listen and join another user’s conversation.
The use of monitoring, recording, or listening devices to eavesdrop, monitor, retrieve, or record telephone conversation or other sound activities, whether or not contemporaneous with transmission, may be illegal in certain circumstances under federal or state laws. Legal advice should be sought prior to implementing any practice that monitors or records any telephone conversation. Some federal and state laws require some form of notification to all parties to a telephone conversation, such as using a beep tone or other notification methods or requiring the consent of all parties to the telephone conversation, prior to monitoring or recording the telephone conversation. Some of these laws incorporate strict penalties.
Conditions
•An extension user can barge-in on a conference.
•An extension user cannot barge-in on an Intercom call if one of the intercom callers is using Handsfree Answerback. Both Intercom parties must lift the handset or press Speaker key.
•barged into call can be placed on hold by the originator of the outside call. Both the outside caller and the extension that barged into the call are placed on hold.
•A call which is barged into can be placed on Park by the originator of the outside call, but only the outside caller is placed in Park. The extension which barged into the call is dropped.
•Privacy blocks Barge-In attempts.
•Function keys simplify the Barge-In operation.
•When Silent Monitor Mode is used, Mute key can be used to activate speech path to the internal and external parties.

T1 Lines In DSX-80/160

T1 Lines
In DSX-80/160, provides for connection to advanced digital lines and simplifes installation.
Description
T1 lines require a unique T1 PCB (P/N 80061) and give the system a maximum of 24 lines in a single PCB slot. The available T1 line types include:
• Loop Start (DTMF and Dial Pulse)
• Ground Start (DTMF and Dial Pulse)
• Direct Inward Dial (DID) Wink Start (DTMF and Dial Pulse)
• Direct Inward Dial (DID) Immediate Start (DTMF and Dial Pulse)
• E&M Tie Line Wink Start (DTMF and Dial Pulse)
• E&M Tie Line Immediate Start (DTMF and Dial Pulse)
T1 gives the system the advantages of advanced digital calling as well as conserving PCB slots. For example, you can set up a system with 12 loop start lines, six tie lines, and six DID lines and use only a single PCB slot. Additionally, the T1 PCB has its own on-board processor and DSP so it minimally impacts other system resources.
Note: Although the T1 PCB can connect directly to the telco’s T1 smart jack, your telco may require that you purchase and install a separate Channel Service Unit (CSU). This unit installs between the smart jack and the T1 PCB.
ANI/DNIS Support
The system is compatible with telco's T1 Automatic Number Identifcation (ANI) and Dialed Number Information Service (DNIS) services. ANI/DNIS services can be provided on T1 loop start, ground start, and DID lines (but not E&M). ANI/DNIS Compatibility provides:
• Selectable Receive Format
• You can set up the system for compatibility with any combination of ANI, DNIS and Dialed Number (Address) data provided by the telco.
• Flexible Routing for DID Lines
• For DID lines, the system can route the incoming call based on the received DNIS data and the entries stored in the DID Translation Table. See Direct Inward Line on page 185 for more.
• Caller ID
• The system can use the received ANI data to display the caller’s number on the called extension’s display. The ANI data can be up to 10 digits long.
FSK Caller ID
The T1 PCB can also receive FSK-based Caller ID (if provided by the telco), the same as the COIU (analog) line cards. To receive this type of Caller ID, you must enable DSP Caller ID for the T1 line circuits in programming.

Create an Auto Attendant

Create an Auto Attendant
The following process shows by example the setup for an auto attendant for Embedded Voicemail. In this example the auto-attendant should give callers the option to press 0 for reception (hunt group 200) or 1 for sales (hunt group 301).
38
· For details of routing calls to the auto attendant, see Routing Incoming Calls to an Auto Attendant .
To create an auto attendant:
1.Start IP Office Manager and load the required configuration.
2.Note that if time profiles are going to be used in an auto attendant, the time profile has to be created before creating the auto attendant. For more information, see the IP Office Manager help.
3.Click Auto Attendant. Any existing Auto Attendants are listed.
4.Click Create a New Record in the Group Pane. Select Auto Attendant .In the Name field enter the name for the auto Attendant.

ACD

Automatic Call Distribution (ACD)

Description
You can put any agent in any group. An agent can be in more than one group. This allows, for example, a Technical Service representative to answer customer service calls at lunch when many of the Customer Service representatives are unavailable.
Automatic Call Distribution (ACD) uniformly distributes calls among agents of a programmed ACD Group. When a call rings into an ACD Group, the system automatically routes the call to the agent that has been idle the longest. Automatic Call Distribution is much more sophisticated and comprehensive than Department Calling and other group services – it can accurately judge the work load at each A agent and distribute calls accordingly. The system allows up to 2 ACD Groups and 16 ACD agents.
The ACD Master Number is the extension number of the whole group. Calls directly ringing or transferred to the ACD Master number enter the group and are routed accordingly. Although the master number can be any valid extension number, you should choose a number that is out of the normal extension range.
Automatic Call Distribution operation is further enhanced by: ACD Call Queuing
When all agents in an ACD Group are unavailable, an incoming call queues and causes the Queue Status Display to occur on the ACD agent's display. The display helps the agent keep track of the traffic load in their group.
The Queue Status Displays shows:
•The number of calls queued for an available agent in the group.
•The trunk that has been waiting the longest, and how long it has been waiting.
For each ACD Group, you can set the following conditions:
•The number of trunks that can wait in queue before the Queue Status Display occurs.
•How often the time in queue portion of the display reoccurs.
ACD Overflow (With Announcements)
ACD offers extensive overflow options for another ACD Group. For example, a caller ringing in when all agents are unavailable can hear an initial announcement (called the 1st Announcement). This announcement can be a general greeting like, “Thank you for calling. All of our agents are currently busy helping other customers. Please stay on the line and we will help you shortly.” If the caller continues to wait, you can have them hear another announcement (called the 2nd Announcement) such as, “Your business is important to us. Your call will be automatically answered by the first available agent. Please stay on the line.” If all the ACD Group agents still are unavailable, the call can automatically overflow to another ACD Group or the Voice Mail. If all agents in the overflow ACD Group are busy, Lookback Routing automatically ensures that the waiting call rings into the first agent in either group that becomes free.
You can assign an ACD Group with any combination of 1st Announcement, 2nd Announcement and overflow methods. You can have, for example, a Technical Service group that plays only the 2nd Announcement to callers and then immediately overflows to Voice Mail. At the same time, you can have a Customer Service group that plays both announcements and does not overflow.

Virtual Extensions


Virtual Extensions
Version 2.0 or higher software provides Distinctive ringing (Intercom / Outside) on Virtual Extension.
Version 2.0 or higher software, a special ring tone is provided when a pre-assigned extension places an Intercom call.
Version 3.0 or higher software, number of Ring Tone pattern is increased to 8 from 4.
With version 3.0 or higher if tone pattern 5 ~ 8 is assigned and the system is downgraded to version 2.X or lower incoming ringing will not be provided. To restore ringing, assign the tone pattern to pattern 1 ~
4.
V Version 3.0 or higher software provides the following enhancements to a virtual extension:
•A virtual extension can now display the caller ID of an internal caller (Callers station name is displayed, if station name is not available the extension number is displayed). Also, a virtual extension can now display the caller ID of an internal or external caller when the virtual is not set to ring (Previously the virtual extension must be set to ring or CID is not displayed).
•A virtual extension now has ‘One shot’ ringing which enhances the feature by allowing, either, a single burst of ringing, or normal ringing tone.
Description
Virtual Extensions are available software extensions in the SL1100. A Virtual Extension assigned to a line key, can appear and ring on an individual station or multiple stations and be used for outbound access.
Up to 50 VE keys are provided.
Conditions
•The 84 available ports/Extensions are assigned on a per extension basis for Virtual Extension key mode.
•The 84 available ports/Extensions are assigned per extension for CAR key mode or Virtual Extension key mode.
•More than one extension can share a Virtual Extension key.
•An extension can have more than one Virtual Extension key assigned.
Assigning a Virtual Extension key of the extension the key is assigned on is not supported.
•Up to 32 incoming calls can be queued to busy Virtual Extension key.
•You cannot have a CAR key and Virtual Extension on the same telephone.
•Virtual Extensions do not support the following features:
-Barge-In
-Conference
-Conference, Voice Call/Privacy Release
-Reverse Voice Over
-Tone Override
-Voice Over
•When a valid system station calls a Virtual Extension appearing on another station, Voice and MW softkeys appear in the display of the calling station, but they do not operate.
•When talking on a Virtual Extension you cannot mute the handset.
•Incoming calls to a virtual extension that appear on stations that are used with the CTI applications, PC Assistant, or PC Attendant, do not show up as a second call in the CTI application.

DHCP

DHCP Client
Description
WARNING: When the VoIPDB is installed on the CPU, the built in LAN port on the CPU becomes disabled. Only the LAN Port on the VoIPDB will be operational.
DHCP Client will access an external DHCP server every time the LAN cable is connected to the CPU/ VoIPDB or when the System is powered up. The System can receive the following information from the DHCP server:
IP Address, Subnet Mask, and Default Gateway.
Conditions
•The DHCP Server should be configured to provide the system the same IP address every time. For example in the DHCP server extend the lease time to infinite or setup the server to provide the same IP address based on the systems MAC Address.
•When changing PRG 10-63-01 (DHCP Client Enable/Disable) a system reset is required for this change to become effective.
•DHCP client can set following programs automatically; however other IP related programs (such as PRG 84-26) have to set manually as required.
-IP Addresses: PRG 10-12-01 (CPU), PRG 10-12-09 (VOIPDB)
-Subnet Masks: PRG 10-12-02 (CPU), PRG 10-12-10 (VOIPDB)
-Default Gateway: PRG 10-12-03
•DHCP Client (PRG 10-63) and existing DHCP Server feature (PRG 10-13) can not be used at the same time.
•While the System accesses the DHCP Server, to receive IP Addressing information, the CPU RUN LED flashes as follows. If the System fails to receive an IP Address from the DHCP server the system will use the IP Address assigned in PRG 10-12.

300 ms
On Off
300
ms 300
ms
200
ms 200
ms 700
ms
•Once after IP Address and Subnet Mask are set, if different IP Addresses or Subnet Mask is delivered during normal operation mode, both LED2 (Red lit) and RUN LED (flash as above) indicate system requires reset.

Tone Service

Howler Tone Service
Description
Howler Tone Service provides a Howler Tone when a station remains off-hook after a call is completed or when a station is off-hook and digits are not dialed in a programmed time.
Conditions
Howler tone is generated 30 seconds after a call is disconnected and the telephone is left off-hook or the telephone is left off-hook without dialin

IPEKCS programming

LCD & Button Functions
While in the PROGRAM MODE, the Liquid Crystal Display (LCD) and Flex button LEDs of an Admin Station are used to guide and indicate status of the feature. The dial-pad is most often used to enter data after selecting a data item using the Flex buttons. In some cases, pressing a Flex button will toggle the entry with the Flex button LED indicating the status (ON/OFF).
For PROGRAM CODES with multiple Flex button selections, the volume controls ([VOL UP] and [VOL DOWN] buttons) may be used to select the next or previous item. The [SPEED] button is generally employed as a delete button to erase existing entries however, where noted, it may be used to confirm a range input. Pressing the [CONF] button returns to the 1st step of the data entry procedure for the PROGRAM CODE without storing unsaved entries.
The [SAVE] button is used to store data after entry. If there are no conflicts in the entered data, confirmation tone will be received and the data stored. If a conflict exists, error tone is provided and newly entered data are not saved. Generally, corrected data may be entered and stored without restarting the entry procedure from the 1st step.

Conference

CONFERENCE
Conference Room
Description
In addition to ad-hoc conferencing, users may establish a Conference Room. Other internal and external parties are invited to the conference and can join the conference without further action by the user who established the Conference Room. A user can transfer an active call to a Conference Room. A Conference Room can be password protected so that only parties that enter the password are allowed to join the Room.
Up to 9 Conference Rooms can be set-up and each can support a maximum of 32 parties with the g.711 or g.729 codec or 24 parties with the g.723 codec. Conference Rooms employ channels from
an MCIM (Multi-party Conference Interface Module). Each MCIM supports up to 32 parties and multiple MCIM units may be installed as shown in the chart below. iPECS-Micro 1 MCIM unit maximum iPECS-50 & 100 2 MCIM units maximum iPECS-300 4 MCIM units maximum iPECS-600 8 MCIM units maximum iPECS-1200 30 MCIM units maximum

IP Office

Essential Edition – Norstar Version still available? Yes – they have been renamed “Basic Edition – PARTNER® Mode” and “Basic Edition – Norstar Mode”. Functionality is similar to Basic Edition. Can I upgrade Basic Edition? Yes. Basic Edition may be upgraded to Essential Edition by purchasing and applying the new Essential Edition License. During this upgrade, the configuration of the system will be retained. Can we still forward/copy voicemail to an email address with Basic Edition? Yes. What is the maximum capacity of Basic Edition? • Up to 100 digital phones (if using only Nortel T series and M series phones) or up to 98 digital phones (any combination of 1400, 9500 and Nortel T series and M-series) supported on DS8, TCM8, DS16/16A and DS30/30A modules • Up to 100 analog phones • Up to 18 PARTNER ETR phones (North America only, additional non ETR phones can be added total to 100) • Up to 32 analog CO lines • 1 PRI / E1 (30 lines, EMEA/MENA only) • 1 PRI / T1 (24 lines, North America only) • Up to 12 BRI channels • Up to 20 SIP lines How many ports and hours of voicemail storage come with Basic Edition? Basic Edition Voice Messaging comes with 2 ports and 15 hours as standard. Can I add more messaging ports or storage time to Basic Edition? Yes - Additional ports can be added while simultaneously increasing storage capacity. With 2 additional ports, there are 4 ports in total, 20 hours of storage; with 4 additional ports, there are 6 ports in total, 25 hours of storage. How many Auto Attendants are available with Basic Edition? Basic Edition supports up to 9 Auto Attendants. Can IP500v2 systems with Basic Edition be networked? No.

Pulse to Tone conversion

An extension can use Pulse to Tone Conversion on trunk calls. Pulse to Tone Conversion lets a user change their extension dialing mode while placing a call. For systems in a Dial Pulse area, this permits users to access dial-up OCCs (Other Common Carriers - such as MCI) from their DP area. The user can, for example:
•Place a call to an OCC over a DP trunk.
•Depending on programming:
Manually implement Pulse to Tone Conversion
- OR -
Wait 10 seconds.
•Dial the OCC security code and desired number. The system dials the digits after the conversion as DTMF.

Automatic Release

Automatic Release
Description
Automatic Release drops the line circuit when an outside party abandons the call. For this feature to work with Loop Start Trunks, the CO/PBX providing the outside line must provide a timed disconnect signal. Automatic Release is normally provided on Ground start trunks are not supported please remove, DID and ISDN trunks.
Conditions
•Automatic Release on ISDN trunks is provided by the protocol.
•When an outside line is accessed using a dedicated line key, the LED associated with the line key goes off when Automatic Release occurs.
•On Loop Start trunks Automatic Release is only available on incoming calls.
•This feature functions while a call is in progress, on hold, or in a conference.
•This feature applies to all ICM type calls in progress, holding or parked.
•When Automatic Release occurs and the telephone is in handsfree mode, Speaker automatically turns off. If using the handset, the station is set to idle when the handset goes on-hook.

Auto attendant

Code Control See Security Code. Voice Mail
Alternate Next Call
Routing Mailbox See Next Call Routing Mailbox. Voice Mail
Announcement Mailbox Mailbox that allows a recorded greeting to play to callers. Automated Attendant
Announcement Message The message that the System Administrator records for a specific Announce-
ment Mailbox. Automated
Attendant
Answer Table Determines how the Automated Attendant answers outside calls on each trunk, according to the time of the day and day of the week that the call is ringing.
Automated Attendant
Answering Schedule
Override Enables an alternate greeting and alternate dialing options for callers. Automated
Attendant
Auto Attendant Direct to Voice Mail
Auto Attendant Direct to Voice Mail sends Automated Attendant calls directly to Automated an extension user's mailbox. Their phone does not ring for calls from the Auto- mated Attendant.
See Greeting in this glossary.
Attendant
Auto Erase or Save When a mailbox user completely listens to a new message and then exits their
mailbox, InMail either automatically archives or deletes the message. Voice Mail
Auto Time Stamp After a user listens to a message, InMail can optionally announce the time and
date the message was left. Voice Mail
Automated Attendant The Automated Attendant can automatically answer the telephone system incoming calls, play an Instruction Menu message, and provide dialing options to callers.
Automated Attendant
Automated Attendant Transfer
While on a trunk call, an extension user can transfer the trunk call to the Auto- mated Attendant so the caller can use the Automated Attendant dialing
options. Voice Mail
Automatic Access to VM by Caller ID
InMail mailbox can be associated with a specific caller ID (CID) number. When the CID number is presented to the InMail it will automatically log the user into
their mailbox. Voice Mail
Automatic Call Routing
to a Mailbox See Go to a Mailbox in this glossary. Automated
Attendant
Automatic Message
Erase/Save See Auto Erase or Save in this glossary. Voice Mail
Automatic Routing for
Rotary Dial Callers If an Automated Attendant caller does not dial any digits, InMail automatically
routes them to a specified option (such as the operator or a mailbox). Automated
Attendant

Automatic extension privacy

Automatic Extension Privacy
Use this feature to prevent a user from joining an active call at an extension. When Automatic Extension Privacy is Assigned for an extension, other users cannot join active calls at that extension. This feature is typically used for single-line telephones and extensions connected to fax machines, modems, and credit card scanners, which make and receive data calls that should not be interrupted. This feature can provide the Privacy (F07) function for single-line telephones.
Considerations 4
■ If you want to be able to intercept calls routed to an auxiliary device—such as an answering machine, a voice messaging system, or an auto attendant—make sure Automatic Extension Privacy is Not Assigned for the auxiliary equipment extension.
■ Single-line telephones and system telephones without a programmed Privacy button cannot override this feature once it is assigned to an extension.
■ If Automatic Extension Privacy is Assigned at an extension, the green light is lit automatically after programming the Privacy button to indicate that Privacy is currently active.
■ Automatic Extension Privacy applies only to active calls. Any user can retrieve a held call unless Exclusive Hold is used.

Tip/Ring Device

Tip/Ring Device Requirements 9
A tip/ring device must meet the following conditions:
■ It must be nonproprietary; that is, it cannot be made specifically for use on a particular telephone system.
■ Its Ringer Equivalence Number (REN) cannot be greater than 2.0. (REN) is a measure of the power it takes to ring a telephone. Each extension jack in your system handles up to 2.0 RENs.) The REN is shown on a label on the device, usually on the bottom.
You can connect a tip/ring two-line device to the system, but it should be installed and used as if it were a single-line device.

AVAYA Partner Abbreviated ringing

Abbreviated Ringing (#305) 4
Use this feature to activate or deactivate Abbreviated Ringing at the system telephone at a specific extension. When you are on a call and Abbreviated Ringing is Active, any incoming call rings only once. The green light next to the line or pool button flashes until the call is answered or the caller hangs up (or for a transferred call, until the call returns to the transfer return extension). This feature prevents incoming calls from distracting you when you are busy on another call. To allow calls to ring repeatedly, set Abbreviated Ringing to Not Active.
Considerations 4 ■ Abbreviated Ringing applies only to system telephones.
■ Abbreviated Ringing is typically set to Not Active for operators and others who handle many calls quickly so they have an audible reminder of incoming calls.
■ Abbreviated Ringing applies to outside, transferred, and intercom calls. ■ The volume of an abbreviated ring is lower than a normal ring.
■ Calls to a busy extension ring at a lower volume than normal even if Abbreviated Ringing is set to Not Active.
Programming 4
To change the Abbreviated Ringing setting for an extension:
1. Press f00ss#305 at extension 10 or 11.
2.Enter the number of the extension to be programmed.
3.To set Abbreviated Ringing, press D until the appropriate value appears.
■ 1 = Active (incoming calls ring once; the factory setting)  ■ 2 = Not Active (incoming calls ring repeatedly)
4.To program another extension, press n or p until the extension number appears on the display. Then repeat step 3.
5. Select another procedure, or exit programming mode.